02-Making 50 litre pot still
Some basic fabrication, finishing the copper dome top of the kettle.
Stillhead all welded up with tri-clamps in place.
Prepping to bend up a 3/4 inch copper tube condenser.
Видео 02-Making 50 litre pot still канала Angry Parrot Distillery
Stillhead all welded up with tri-clamps in place.
Prepping to bend up a 3/4 inch copper tube condenser.
Видео 02-Making 50 litre pot still канала Angry Parrot Distillery
Показать
Комментарии отсутствуют
Информация о видео
10 февраля 2017 г. 9:42:53
00:09:15
Другие видео канала
03-Making 50 litre pot still
4inch copper column
Build a Simple Modular Pot Still Head + How to Solder Copper to Stainless Steel.
4inch condenser
Pre-run set up
First Cleaning Run
Olympic Distillers - Beer Keg Still with Thumper- Spirit Run
spirit run video.wmv
Beginner's Guide #5 Moonshine Stills
Twin Thumpers, round 2
The Keggle
Distillers Parrots: Should I Use One? Do They Smear?
How to Build a still
Should You Buy A Pot Still Or Reflux Still & How Are They Different
RUNNING THE MIGHTY MINI USING A PID CONTROLLER
Making a Bubble Plate chamber
Hot Water Cylinder to Kettle conversion - part 2
4" Lyne arm fabrication.
Pot Still Build, Keg into Boiler: Part 1
Make Moonshine Still part 2