The 3" Prototype with HGLRC Zeus35 AIO and Caddx Vista

Hi everyone! I decided to try my hand at a little frame design as I had a simple idea for a 3" quad based around the HGLRC Zeus35 AIO board and Caddx Vista. I used Fusion 360 to design the frame and TPU camera mount and I had the carbon cut at Flynoceros. They did a very nice job although getting the first frame parts was a little pricey at $60. I will also try Armattan as they are cheaper but it also seems to take quite a bit longer.

Flynoceros
https://theflynoshop.com

HGLRC Zeus35
https://pyrodrone.com/collections/flight-controllers/products/hglrc-zeus35-aio-3-6s-f4-flight-control-35a-bls-4in1-esc-20x20-1

M2 stand-offs
https://www.racedayquads.com/collections/m2-hardware/products/m2-knurled-standoff-choose-your-size-16-23-25mm-1-pc

M2 stepped washers
https://www.racedayquads.com/collections/m2-hardware/products/m2-countersunk-washer-1pc-choose-your-color

M2 nuts and bolts
https://www.racedayquads.com/collections/m2-hardware/products/m2-black-steel-280-piece-nut-bolt-kit

Видео The 3" Prototype with HGLRC Zeus35 AIO and Caddx Vista канала mini micro FPV