How to setup the correct working pressure on a spray gun for best performance

In this instalment of GT Air Projects we show you how to correctly setup your spray gun for optimum performance, efficiency and atomisation. The extremely popular Burisch GTR500 LVLP Gravity Feed spray gun is used for this demonstration, in conjunction with the Fast Mover FMT3040 mini spray gun regulator. We’ll explain what all the adjustments do on the gun as well as explain the difference between static and working pressure and how to set it up correctly, accurately, every time.

Products used in this video:
BURISCH GTR500 LVLP Gravity Feed Spray Gun
https://gtair.co.uk/spray-guns/259-burisch-gtr500-lvlp-13mm-spray-gun-5060523510016.html

FAST MOVER FMT3040 Mini spray gun regulator with gauge
https://gtair.co.uk/accessories/49-air-regulator-for-spray-guns-14bsp-thread.html

BURISCH BT350V 10bar 3HP 50L Air Compressor
https://gtair.co.uk/air-compressors/30-burisch-bt-350v-50-litre-10-bar-direct-drive-air-compressor.html

Mini Spray Gun Water Trap Filter
https://gtair.co.uk/module/iqitsearch/searchiqit?s=GUNFILTER

Silverline Filter Regulator with Water Trap
https://gtair.co.uk/air-treatment/28-air-line-filter-regulator.html

Visit www.gtair.co.uk for our full range of air compressors, spray guns, filters, regulators and related accessories.

Видео How to setup the correct working pressure on a spray gun for best performance канала GT Air Projects