Volt Amp Measuring Module | DC 100 Volts 10 Amps | DSN-VC288 Module

This video is about volt-ampere measuring meter..which is
DSN-VC288
Module wiring diagram: https://drive.google.com/file/d/1hDzQKz_XnKWFIJtPS_4AdmNq4GIXkG­V/view?usp=drivesdk

Thin Red wire : Power Supply for module: 3 ­- 24 volt DC
Thin Black wire : Power Supply Ground
Thin Yellow wire : Voltage measuring Probe
Thick red and black wire : Amps measuring wire
the module can be powered with 3-­24 volt DC..
in this video i powered the module with the measuring volt as it was less than 24 volt..but if u want to measure more than 24 volts..u
have to give the module power from other source.. otherwise the module will come up with magic smoke.. :D
the module will drain only 20mA.
After buying you have to fine tune the module..behind the module there are 2 trimmer pot for fine tuning the volt and amp
reading.. use your multi meter to fine tune the module..
if there is any query feel free to ask in the comment section. :)

Видео Volt Amp Measuring Module | DC 100 Volts 10 Amps | DSN-VC288 Module канала Tech Sid