How to make an Incubator at home | DIY Arduino | Temperature controlling Incubator

Where to prototype 10 PCBs for $2 only: https://jlcpcb.com

I have made an incubator to control the temperature within a preferred range (36-38) degree Celsius using Arduino Nano. Watch the video, and you too can make it.
Please remember that you need to add I2C library into the Arduino libraries folder to successfully run the coding, A link for the library is given in the later part of this description.

Things you need:
Arduino Nano
LM35 Temperature sensor
One channel 5V relay module
LCD 16X2 display with I2C module
Red&Green LEDs
Tungsten Bulb with wire and plug
Male,Female header pins
Jumper wires(male to female, female to female)
A wooden/Cardboard box
breadboard, dot board, or PCB board
Supporting equipment

Link to the connection diagram:https://drive.google.com/open?id=1BQzBS3BCAQWTsY1z4X-o0gJPUVCM8keI
Link to the I2C library(you will need it to compile the code and run when using the LCD display&I2C library): https://www.youtube.com/redirect?v=1beiO7fGIhU&redir_token=Bv7ysvCz0Ce1JosdfZD2_7bEu198MTUyMDM0NDUxM0AxNTIwMjU4MTEz&q=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1JCOHEuDHK0iSFhXPW_q1Kr_JcwcIHDfd&event=video_description
Link to the coding:https://drive.google.com/open?id=1PwKhBTJ2CL1dwJs-cuC-a7Rpgd4uHY-6
Gerber file for the PCB board:
Music: Elektronomia Fire https://www.youtube.com/watch?v=mX-SktWVHao

Видео How to make an Incubator at home | DIY Arduino | Temperature controlling Incubator канала Nova Technologies