Replacing the potmeters on the 300 W, 20 A DC-DC converter

I had to do some repair on my DIY power supply and I had to replace the buck converter in it. I thought it might be useful for some people to see how the voltage and current adjusting potmeters (CV and CC, respectively) are wired up and how they can be replaced. It is not a complicated task, and I recommend doing it if you want to change the output often. It is not too nice to adjust the live circuit by a tiny screw very close to the connections.

If the video was useful, please subscribe!

You can buy the parts by the following affiliation links:
DC-DC buck converter (6-40V To 1.2-36V 300W 20A): https://www.banggood.com/custlink/GDmmIOj9Gm
Multimeter: https://www.banggood.com/custlink/vDKGFeuJtt
Scredriwer set: https://www.banggood.com/custlink/mDGGZBwkuF
100K linear potmeters: https://www.banggood.com/custlink/vmKyRFQ52V
Soldering fan with filter: https://www.banggood.com/custlink/vmvDSgwzqO
Silicone Soldering mat: https://www.banggood.com/custlink/D3Kv0j8t6O
TS100 Soldering Iron: https://www.banggood.com/custlink/vmm3IBTMTG

Видео Replacing the potmeters on the 300 W, 20 A DC-DC converter канала Curious Scientist