Making electric Roller Bender Part part 3/3
If you didn't see how I built this machine, you can do it here: https://www.youtube.com/playlist?list=PLtp0qX2WkOnWPX41pclLIcl4Sg3kbcE1b
After doing this test I deduced a couple of conclusions which can be helpful for you.
9RPM It's definitely too slow. I suppose 15 or 20RPM would be a better solution. If I find time someday, I'll change pulley's. It causes that bender will bend a material faster than now.
Wheels which hold material have to be tempered. I thought this process pass me by but I was wrong.
I'm going to give all axes to temper. It won't damage them moreover It'll give them a positive effect.
Advantages of this project:
A cylinder and a hydraulic pump: I'm content with this system and I suppose It's much better solution than a screw and nut.
Replacement of bearings in the middle part was accurate. A roller is much stiff than before.
A switch R-0-L holding in the hand turned out to be better option than mounted directly to the bender.
As you have seen, the largest material I bend is 30x30x2mm. Behind the camera I tried 30x30x3 and it worked, although it took a bit longer. I think that the 40x40x2mm profile is the maximum size that this machine can bear.
Some tools I used in this construction:
Self made:
Belt grinder 2x48 - https://youtu.be/2rB59KaMjaQ
Vise - https://youtu.be/7BANZRdqFvU
Drill press STAND with COOLANT SYSTEM - https://youtu.be/o68uiTp_gWk
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Mag drill Evolution EVO MAG 28
Band saw Stiler BS 712R
Drill press ZX7016
----------------------------------------------------------------------------
Videos that you may like:
https://youtu.be/V0ahzDSYDxo - MOTORIZED Plasma Cutting Track
https://youtu.be/LTC1qJrGXnM - Simple Power File DIY
https://youtu.be/f-Ebryi5m0g - Chain Saw HACK 7 - Drill Attachment
https://youtu.be/CIU5tcuduCM - KEYWAY on the LATHE
----------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
----------------------------------------------------------------------------
Music by YouTube library :
Nightingale
Love Now
----------------------------------------------------------------------------
Видео Making electric Roller Bender Part part 3/3 канала Made in Poland
After doing this test I deduced a couple of conclusions which can be helpful for you.
9RPM It's definitely too slow. I suppose 15 or 20RPM would be a better solution. If I find time someday, I'll change pulley's. It causes that bender will bend a material faster than now.
Wheels which hold material have to be tempered. I thought this process pass me by but I was wrong.
I'm going to give all axes to temper. It won't damage them moreover It'll give them a positive effect.
Advantages of this project:
A cylinder and a hydraulic pump: I'm content with this system and I suppose It's much better solution than a screw and nut.
Replacement of bearings in the middle part was accurate. A roller is much stiff than before.
A switch R-0-L holding in the hand turned out to be better option than mounted directly to the bender.
As you have seen, the largest material I bend is 30x30x2mm. Behind the camera I tried 30x30x3 and it worked, although it took a bit longer. I think that the 40x40x2mm profile is the maximum size that this machine can bear.
Some tools I used in this construction:
Self made:
Belt grinder 2x48 - https://youtu.be/2rB59KaMjaQ
Vise - https://youtu.be/7BANZRdqFvU
Drill press STAND with COOLANT SYSTEM - https://youtu.be/o68uiTp_gWk
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Mag drill Evolution EVO MAG 28
Band saw Stiler BS 712R
Drill press ZX7016
----------------------------------------------------------------------------
Videos that you may like:
https://youtu.be/V0ahzDSYDxo - MOTORIZED Plasma Cutting Track
https://youtu.be/LTC1qJrGXnM - Simple Power File DIY
https://youtu.be/f-Ebryi5m0g - Chain Saw HACK 7 - Drill Attachment
https://youtu.be/CIU5tcuduCM - KEYWAY on the LATHE
----------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
----------------------------------------------------------------------------
Music by YouTube library :
Nightingale
Love Now
----------------------------------------------------------------------------
Видео Making electric Roller Bender Part part 3/3 канала Made in Poland
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Giętarka / Walcarka do rur i profili - BudowaMake A Metal Bender | Simple Homemade Roller Bender | DIYCortadora de Tubos Boca de Pescado | Tube NotcherTUTORIAL DE COMO CURVAR CON UNA DOBLADORA DE CAÑOS, TUBOS Y PERFILES MC150B NARGESAMaking electric Roller Bender Part 1/3CURVADORA ROLADORA DE TUBOS Y PERFILES NARGESA MC400como fazer uma Calandra caseira, homemade roller benderCalandra para Espirais, Serpentinas e Estribos Redondos - Roller Bender Machine WeldingMaking Mobile Battery Powered Scissor Lift Table (workbench)Making electric Roller Bender Part 2/38 Ideas for IMPROVING a BandsawHomemade Lathe MachineCurvatrice a rulli fai da te (homemade roller bender)TUTORIAL ON HOW TO BEND WITH A SECTION BENDING MACHINE MC150B NARGESAHow to Make a Grinding machine and a belt grinder from an old motor.Making electric Roller Bender - DIY Roller BenderMaking mobile Gas-Powered Belt ConveyorMake A Metal Bender || Homemade Roller BenderHydraulic CAR JACK modification