DIY Digital Soldering Station (Cheapo Hakko 907)
Your one-stop PCB prototype Partner PCBWay: (https://www.pcbway.com/?from=TechBuilder)
Build a DIY Digital Soldering Station (Homebrew Hakko 907). Enjoy the variable and constant temperatures and quick warm-up times up to 25s.
Project Specifications:
- Designed for Hakko 907 handles
- Compatible with similar handles
- Temperature Range: 27°C-525°C
- Warmup Time: 25s - 37s (325°C)
- Recommended Supply: 24V, 3A
- Power: 50W (Average)
Order My PCB From PCBway (No Gerber Needed):
https://www.pcbway.com/project/shareproject/DIY_Hakko_907_Digital_Soldering_Station.html
Schematics, PCB Layout, STL Files:
https://drive.google.com/drive/folders/1-OA5j5cjvG-Llb6gYXPPmlvDLtvpY8Eu
Instructable Tutorial:
https://www.instructables.com/DIY-Digital-Soldering-Station/
Material Link Sheet: Coming Soon
Materials:
- Hakko 907 Handle
- Arduino Nano
- Buck Converter (MP2303)
- 5 Pin DIN Female Connector
- DC Jack (2.1mm)
- 24V 3A Power Supply
- 16X2 I2C LCD
- LM358 Op-Amp IC
- IRFZ44N MOSFET
- 470uF 25V Electrolytic Capacitor
- 470Ω 1/4W Resistor
- 2.7kΩ 1/4W Resistor
- 3.3kΩ 1/4W Resistor
- 10kΩ 1/4W Resistor
- 10k Potentiometer
Best place to buy components in Philippines:
https://www.e-gizmo.net/oc/index.php
Design Process: (0:00)
Project Building: (2:53)
#DIY #Electronics #Arduino
Видео DIY Digital Soldering Station (Cheapo Hakko 907) канала TechBuilder
Build a DIY Digital Soldering Station (Homebrew Hakko 907). Enjoy the variable and constant temperatures and quick warm-up times up to 25s.
Project Specifications:
- Designed for Hakko 907 handles
- Compatible with similar handles
- Temperature Range: 27°C-525°C
- Warmup Time: 25s - 37s (325°C)
- Recommended Supply: 24V, 3A
- Power: 50W (Average)
Order My PCB From PCBway (No Gerber Needed):
https://www.pcbway.com/project/shareproject/DIY_Hakko_907_Digital_Soldering_Station.html
Schematics, PCB Layout, STL Files:
https://drive.google.com/drive/folders/1-OA5j5cjvG-Llb6gYXPPmlvDLtvpY8Eu
Instructable Tutorial:
https://www.instructables.com/DIY-Digital-Soldering-Station/
Material Link Sheet: Coming Soon
Materials:
- Hakko 907 Handle
- Arduino Nano
- Buck Converter (MP2303)
- 5 Pin DIN Female Connector
- DC Jack (2.1mm)
- 24V 3A Power Supply
- 16X2 I2C LCD
- LM358 Op-Amp IC
- IRFZ44N MOSFET
- 470uF 25V Electrolytic Capacitor
- 470Ω 1/4W Resistor
- 2.7kΩ 1/4W Resistor
- 3.3kΩ 1/4W Resistor
- 10kΩ 1/4W Resistor
- 10k Potentiometer
Best place to buy components in Philippines:
https://www.e-gizmo.net/oc/index.php
Design Process: (0:00)
Project Building: (2:53)
#DIY #Electronics #Arduino
Видео DIY Digital Soldering Station (Cheapo Hakko 907) канала TechBuilder
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Soldering StationKSGER T12 Soldering Station Review 3.1S VersionDIY Dry Film PCB Fabrication TutorialDIY Cheap 1000W Sine Wave Inverter (12V-220V - EGS002)Soldering Crash Course: Basic Techniques, Tips and Advice!Build your own Injection Molding Machine for around $200EEVblog 1378 - NEW Uni-T UT61E+ Multimeter - Still bang-per-buck king?Heat Pumps: the Future of Home HeatingI turn Fridge Compressor into 220v electric GeneratorHow to make a DIY Smart MirrorSalvage 18650 Li-ion Batteries From Powertools - Tesla Cells5 BIG IDEAS DIY very low costBuild A Magnetic Stirrer (Vortex Mixer)LED Circuit Design - How to design LED circuitsSoldering Iron Showdown: $10 vs $1,000 Soldering Iron! Which Is The Best For You?Building a 3kW Induction Heater ll Complete Build GuideHow to make a T12 Soldering Station | DIY10 STUPID ERRORS To AVOID in Soldering and TIPSThings you can make from old, dead laptopsOrange Pi Zero 2: Tiny, low-cost, quad core SBC