Ender3 V2 Micro Swiss Direct Drive Extruder upgrade
Micro Swiss Direct Drive Extruder upgrade can replace the classic bowden type extruder of the Ender3 V2 and expand usability of this very popular 3D printer. The kit can be purchased with or without all metal hotend. With new hotend Ender3 V2 can be safely used on higher temperatures too (over 240°C). With provided steel nozzle it can print abrasive materials too, like carbon fiber or glow in the dark filaments.
Related videos:
Micro Swiss All metal hotend upgrade:
https://youtu.be/ZfVN0yX5kJc
BLTouch installation to Ender3V2:
https://youtu.be/7ZKg5u1pia4
Micro Swiss Direct Drive Extruder used in the video:
https://store.micro-swiss.com/collections/extruders/products/micro-swiss-direct-drive-extruder
Fan shroud on Thingiverse:
https://www.thingiverse.com/thing:4408571
Another option for fan shroud (not free and requres new fans)
https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang
List of all Ender3V2 upgrade videos on MyTechFun channel:
https://www.mytechfun.com/videos/ender3upgrade
Dual Z axis upgrade solutions:
- with two stepper motors: https://youtu.be/9nvQR1OGIq4
- with timing belt and pulley: https://youtu.be/TIptLVvszLU
Contents:
0:00 Introduction
4:02 Reason for direct drive
6:32 Unboxing
7:43 Hardware installation
27:20 X, Y offset
30:29 E-steps
33:29 First print: Calibration Cube
34:14 Wire management
37:18 Benchy from PLA
38:08 Test with flex filament
40:05 Conclusions
#microswiss #ender3v2 #3dprinting
Видео Ender3 V2 Micro Swiss Direct Drive Extruder upgrade канала My Tech Fun
Related videos:
Micro Swiss All metal hotend upgrade:
https://youtu.be/ZfVN0yX5kJc
BLTouch installation to Ender3V2:
https://youtu.be/7ZKg5u1pia4
Micro Swiss Direct Drive Extruder used in the video:
https://store.micro-swiss.com/collections/extruders/products/micro-swiss-direct-drive-extruder
Fan shroud on Thingiverse:
https://www.thingiverse.com/thing:4408571
Another option for fan shroud (not free and requres new fans)
https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang
List of all Ender3V2 upgrade videos on MyTechFun channel:
https://www.mytechfun.com/videos/ender3upgrade
Dual Z axis upgrade solutions:
- with two stepper motors: https://youtu.be/9nvQR1OGIq4
- with timing belt and pulley: https://youtu.be/TIptLVvszLU
Contents:
0:00 Introduction
4:02 Reason for direct drive
6:32 Unboxing
7:43 Hardware installation
27:20 X, Y offset
30:29 E-steps
33:29 First print: Calibration Cube
34:14 Wire management
37:18 Benchy from PLA
38:08 Test with flex filament
40:05 Conclusions
#microswiss #ender3v2 #3dprinting
Видео Ender3 V2 Micro Swiss Direct Drive Extruder upgrade канала My Tech Fun
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Micro Swiss Dual Gear Direct Drive Upgrade For Ender 3 and CR-10 3D Printers](https://i.ytimg.com/vi/5mUT6dB5HcQ/default.jpg)
![Creality Ender 3 V2 - Fixing the Hidden Problem that Can Cause Stringing and Unresponsiveness](https://i.ytimg.com/vi/uEo5vNGsO6Q/default.jpg)
![Ender 3 V2 - Print Silently and 4X Faster! (Step-By-Step Guide)](https://i.ytimg.com/vi/Q41AhKl1_kI/default.jpg)
![Bowden 3d Printer Extruder Vs. Direct Drive](https://i.ytimg.com/vi/-S8Pf58zP4k/default.jpg)
![Hero Me Gen 5: The ultimate part cooling fan duct for Creality 3D printers?](https://i.ytimg.com/vi/DUkoKzOFWFs/default.jpg)
![Ender 3 - Micro Swiss Direct Drive & Hotend Installation Guide. Ender 3 Upgrade - Flexible Filaments](https://i.ytimg.com/vi/8iAuBYfwLvg/default.jpg)
![Ender3 V2 upgrade: All metal hotend by Micro Swiss + Firmware edit to allow higher temperatures](https://i.ytimg.com/vi/ZfVN0yX5kJc/default.jpg)
![All Metal Hotend - Ender 3 - Chris's Basement](https://i.ytimg.com/vi/ZJIEcRBNnN8/default.jpg)
![Ender 3 V2 Auto Bed Level](https://i.ytimg.com/vi/TroPjdkSEOY/default.jpg)
![Stop Ender 3 Stringing with this One Weird Trick! (ok but seriously)](https://i.ytimg.com/vi/_QRb54zVPfQ/default.jpg)
![Linear rails guide and test on Ender 3 and Ender 5](https://i.ytimg.com/vi/I3xMHjiYENk/default.jpg)
![Creality CR Touch auto leveling kit, is it better than BL Touch?](https://i.ytimg.com/vi/ic0zYazi65c/default.jpg)
![Ender 3 v2 BIQU H2 Direct Drive Upgrade](https://i.ytimg.com/vi/64GKpcXCic4/default.jpg)
![3D Printed Direct Drive for the Ender 3 Pro](https://i.ytimg.com/vi/Zbk0viFC1ew/default.jpg)
![Level Up! Install Creality's BLTouch Bed Leveling Kit on Ender-3 V2!](https://i.ytimg.com/vi/NDe6QXreBNs/default.jpg)
![Creality Ender 3 V2 - My Cleanest Print Ever and You Can Too!](https://i.ytimg.com/vi/3lt_Cgbh3mU/default.jpg)
![Direct Drive on Creality Ender 3](https://i.ytimg.com/vi/iFNcP-OyAH0/default.jpg)
![3 ways to add a dual Z axis - Including G34 auto Z levelling](https://i.ytimg.com/vi/6UgT9YqY3UA/default.jpg)
![Creality Ender 3 v2 fan upgrades. It's so Quiet now Amazing. This is how I did my 3D fan upgrades](https://i.ytimg.com/vi/ird74jGCH6k/default.jpg)
![First 24 Upgrades & Mods for my Ender 3 Pro](https://i.ytimg.com/vi/kG_YKeJDaX8/default.jpg)