Omnibus Fireworks V2 | BETAFLIGHT FLIGHT CONTROLLER REVIEW
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
The Omnibus Fireworks V2 is an incredibly versatile and feature-packed Betaflight flight controller. It has un-populated pads for you to add your own tantalum capacitors. The current sensor is pre-calibrated and uses Hall Effect instead of a shunt resistor, so it's always correct, and it doesn't bleed any power as heat (not even a tiny bit).
At the time of this video's release, the Omnibus Fireworks V2 is not widely available. The V1 looks almost the same but it doesn't have the cutouts on the corners for the ESC wires. Also, the ribbon cable on the V1 is outside the board and is more vulnerable. The V1 is a fine FC but don't accidentally buy the V1 if you want the V2.
https://store.myairbot.com/flight-controller/omnibus-f3-f4/omnibusfireworksv2.html
https://www.rcgroups.com/forums/showthread.php?3054987-OMNIBUS-Fireworks-v2-from-Airbot
http://pirofliprc.com/OMNIBUS-Fireworks-v2_p_5757.html
Видео Omnibus Fireworks V2 | BETAFLIGHT FLIGHT CONTROLLER REVIEW канала Joshua Bardwell
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
The Omnibus Fireworks V2 is an incredibly versatile and feature-packed Betaflight flight controller. It has un-populated pads for you to add your own tantalum capacitors. The current sensor is pre-calibrated and uses Hall Effect instead of a shunt resistor, so it's always correct, and it doesn't bleed any power as heat (not even a tiny bit).
At the time of this video's release, the Omnibus Fireworks V2 is not widely available. The V1 looks almost the same but it doesn't have the cutouts on the corners for the ESC wires. Also, the ribbon cable on the V1 is outside the board and is more vulnerable. The V1 is a fine FC but don't accidentally buy the V1 if you want the V2.
https://store.myairbot.com/flight-controller/omnibus-f3-f4/omnibusfireworksv2.html
https://www.rcgroups.com/forums/showthread.php?3054987-OMNIBUS-Fireworks-v2-from-Airbot
http://pirofliprc.com/OMNIBUS-Fireworks-v2_p_5757.html
Видео Omnibus Fireworks V2 | BETAFLIGHT FLIGHT CONTROLLER REVIEW канала Joshua Bardwell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
This FC puts Crossfire and Unify right on board | ZEEZ F7Speedybee Betaflight Flight Controller with Bluetooth On BoardShould you use the DJI FPV controller? Or not.The Difference Between a Drone Flight Controller and Flight ComputerMy Flight Controller Picks for New Builds (May 2020)Let's Check Out Zeez F7 Flight Controller & LED's 💡🔥What does it take to break the JB Xilo Beginner Build? (FPV FREESTYLE)Better than DJI FPV? Fat Shark Dominator / Walksnail Avatar FPV is here!Top 10 BIGGEST DRONES you can flyNew FrSky Flight Controllers with Integrated Receiver (Re-posted video)Talon F7 20x20 Flight Controller is a Tiny Beast!Airbot Typhoon32 4in1 ESC REPAIRJHEMCU F722 Flight Controller test.What does iBus, sBus, PWM, PPM, Etc. RC Protocol mean?? - Wizard X220 - Help For BeginnersT-Motor F4 FC + F55A PRO II 4in1 ESC - StackDJI FPV Finally supports HDMI Out - FPV ON YOUR TVEachine EV800D FPV 5.8G diversity goggles /w a DVR - definitely a MUST have item!BetaFPV Starter Kit 2 - $129 everything you need to get started in FPVOmnibus F7: Powering FC, Receiver, Cam, & VTx