From Scrap to Stock: Silver Ingot Casting

Get great results when you cast an ingot that you can roll into usable stock. In part 1 of this 3-part series, John Sartin of the Rio Grande Jewelry Tech Team covers how to prep an ingot mold, torch technique, pouring with confidence, inspecting your finished ingot, and using a charcoal block in place of a mold.

Part 2: https://youtu.be/Cx2wHbq3H0A
Part 3: https://youtu.be/e4cZoYCgy_4

Check out the products used in this video:
•
Smith Little Torch - http://ow.ly/AxgW50DHZre
•
Propane Multi-Orifice Torch Tip - http://ow.ly/cN6e50DH8tp
•
Acetylene Multi-Orifice Torch Tip - http://ow.ly/FQ7x50DHZwq
•
Whip Crucible and Tongs - http://ow.ly/tcY050DH7UZ
•
Casting Flux - http://ow.ly/lftS50DHZAF
•
Ingot Mold - http://ow.ly/OvD750DHZni
•
Soft Charcoal Soldering Block - http://ow.ly/LDe850DH7X0

Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.

Connect with Rio Online:
Visit Rio's Website: http://ow.ly/mc0u309UnIp
Subscribe to Our Channel: http://ow.ly/dAbu309U7eg
Find Rio on Facebook: http://ow.ly/DpRd309U63Z
Follow Rio on Twitter: http://ow.ly/wdtU309U6oF
Follow Rio on Instagram:  http://ow.ly/eu5A309U6vM

Видео From Scrap to Stock: Silver Ingot Casting канала Rio Grande