How to Install Flysky Rx in TinyHawk S (and Freestyle) + FS-i6X and BetaFlight Setup Guide Tutorial
Want to fly the Emax TinyHawk S with your Flysky Radio? Me too! But you can't. 😢 Unless you install a receiver (Rx) yourself! So in this video I'll show you how I did just that, as well as how to setup the FS-i6X transmitter (Tx) and BetaFlight so that you can actually start flying (yay!)! 😄
*NOTE: my TinyHawk S came with PID profile 2 (for flying with 2s batteries) as the default. I had to change this since I wanted to fly 1s.*
(If you are having trouble getting BetaFlight to work, see this video https://youtu.be/xmaTq4JgTXI)
This should also work for the TinyHawk Freestyle.
This is the receiver I used: https://www.getfpv.com/flysky-fs-rx2a-pro-2-4ghz-receiver.html
but I recommend either this: https://amzn.to/33445Jb
or this: https://www.banggood.com/custlink/v3vDJYjMWs
How to solder https://youtu.be/XldoOtQAZn4
i6x transmitter https://amzn.to/2YDP2CP
If you pretty much know what you're doing with BetaFlight and stuff, here are the key points to get the receiver talking to the quad:
- Solder rx signal wire to rx1 pad on flight controller (use ibus)
- Get into your radio and assign switches to the aux channels
- In betaflight:
Ports - UART1 serial RX selected
Configuration - select Serial Receiver, ibus
Receiver - select AETR1234
----------------
Buy through these links to support the channel:
Amazon https://amzn.to/2FHjkwI
Banggood https://www.banggood.com/custlink/KvmDJdaqrC
I have a website http://rcwithadam.com/
-------
MY GEAR
RADIO: https://amzn.to/2osIur0 https://www.banggood.com/custlink/3KvvWylkJ0
QUAD RECEIVER: https://amzn.to/2CsvX0C https://www.banggood.com/custlink/v3vDJYjMWs
AIRPLANE RECEIVER: https://amzn.to/2OBIqnj https://www.banggood.com/custlink/GG3vryakFJ
QUAD PROPS (my fav) https://amzn.to/2DywVXA https://www.banggood.com/custlink/GGKGpRjkJz
FILMING GEAR
Main camera https://amzn.to/2pGZA4L
Mic https://amzn.to/2OKoCOB
Camera stand https://amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
**REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!**
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects!
Видео How to Install Flysky Rx in TinyHawk S (and Freestyle) + FS-i6X and BetaFlight Setup Guide Tutorial канала RCwithAdam
*NOTE: my TinyHawk S came with PID profile 2 (for flying with 2s batteries) as the default. I had to change this since I wanted to fly 1s.*
(If you are having trouble getting BetaFlight to work, see this video https://youtu.be/xmaTq4JgTXI)
This should also work for the TinyHawk Freestyle.
This is the receiver I used: https://www.getfpv.com/flysky-fs-rx2a-pro-2-4ghz-receiver.html
but I recommend either this: https://amzn.to/33445Jb
or this: https://www.banggood.com/custlink/v3vDJYjMWs
How to solder https://youtu.be/XldoOtQAZn4
i6x transmitter https://amzn.to/2YDP2CP
If you pretty much know what you're doing with BetaFlight and stuff, here are the key points to get the receiver talking to the quad:
- Solder rx signal wire to rx1 pad on flight controller (use ibus)
- Get into your radio and assign switches to the aux channels
- In betaflight:
Ports - UART1 serial RX selected
Configuration - select Serial Receiver, ibus
Receiver - select AETR1234
----------------
Buy through these links to support the channel:
Amazon https://amzn.to/2FHjkwI
Banggood https://www.banggood.com/custlink/KvmDJdaqrC
I have a website http://rcwithadam.com/
-------
MY GEAR
RADIO: https://amzn.to/2osIur0 https://www.banggood.com/custlink/3KvvWylkJ0
QUAD RECEIVER: https://amzn.to/2CsvX0C https://www.banggood.com/custlink/v3vDJYjMWs
AIRPLANE RECEIVER: https://amzn.to/2OBIqnj https://www.banggood.com/custlink/GG3vryakFJ
QUAD PROPS (my fav) https://amzn.to/2DywVXA https://www.banggood.com/custlink/GGKGpRjkJz
FILMING GEAR
Main camera https://amzn.to/2pGZA4L
Mic https://amzn.to/2OKoCOB
Camera stand https://amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
**REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!**
-----------
About this channel: Adam makes FUN and HELPFUL videos about building and flying Radio Controlled aircraft, tech, and DIY projects!
Видео How to Install Flysky Rx in TinyHawk S (and Freestyle) + FS-i6X and BetaFlight Setup Guide Tutorial канала RCwithAdam
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
EMAX TINYHAWK S 2S - OFFICIAL RELEASE - Full Review, Flights, & Betaflight SetupDO NOT buy a FLYSKY Transmitter WITHOUT Watching THIS VIDEO!!!Are FlySky and FRsky the same? Nope. What's the difference?How To Set Up Tinyhawk Drones With FrSky Tx and BetaflightFLYSKY emax tinyhawk 6 DOLLAR mod - how toTinyhawk 2 Freestyle - XM+ receiver and Eachine Nano v2 VTX upgradeHow to Bind with Flysky Receivers - iA6, X6B, iA6B, Fli14+, GT3B, FLIT10 - FS-i6 and FS-i6X RadioEmax Tinyhawk II Review, Setup, & Bind: Best tiny whoop (micro drone) for beginners/indoor flying?How to update your Radiomaster, Jumper radio. #jumper #radiomaster TX12 TX16s T16Taranis X-Lite Setup (Throttle, Stick tension, Binding, Switches, Gyro...)Emax Tinyhawk Project Mockingbird | THE BEST IT'S EVER FLOWNFlySky FS-i6X How to Setup TOP 5 FUNCTIONS for BEGINNER PILOTSNirvana for Dummies # 1 Menu OverviewFPORT SETUP (JUMPER R1F RECEIVER!)TinyHawk S - Start Your FPV Journey!Emax Tinyhawk Freestyle vs Tinyhawk S vs the Original: Which is best for you?Low-Budget FPV Drones that Don't Suck: Mobula 6 HD + Tinyhawk 2 Freestyle ReviewCustom Built Reptile Cloud 149 V1 with Shark Byte and GhostBinding and Setting Up the FlySky i6 Transmitter for a quadcopter/drone