3D Printed Multirotor Flight Test
This is my first attempt at 3D printing a multirotor.
The 3D model can be found here: http://www.thingiverse.com/thing:793425.
The electronics are the same as for the DJI Flamewheel F450.
Comin Round the Mountain - Modern av Kevin MacLeod licensieras under licensen Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Källa: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100817
Artist: http://incompetech.com/
Видео 3D Printed Multirotor Flight Test канала Stefan Ekstam
The 3D model can be found here: http://www.thingiverse.com/thing:793425.
The electronics are the same as for the DJI Flamewheel F450.
Comin Round the Mountain - Modern av Kevin MacLeod licensieras under licensen Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Källa: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100817
Artist: http://incompetech.com/
Видео 3D Printed Multirotor Flight Test канала Stefan Ekstam
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
FrigolitflyttVärmegolvMelkers - Min KlockaUppläggning inför murningGjutningDJI F550 Hexacopter flight over abandoned airfieldDJI F550 Hexacopter 360 Video TestRIB tour in the archipelago of StockholmFlying a Real HelicopterDJI F550 Hexacopter Ladybug LandingDJI F550 Hexacopter Box DropDJI F550 Hexacopter Night FlightDJI F550 Hexacopter Parachute TestTrip to South AfricaShtandart - A Russian training shipFlying a Real AirplaneDJI F550 Hexacopter crash after failed loop attempt, burning LiPo batteryParasailing at Ft. Myers Beach, FloridaDJI F550 Hexacopter crash after flight above the cloudsDJI Mavic Pro Goes West