Shock absorber | design and assembly | fusion 360 tutorials

Support us-
https://www.paypal.me/supportsparkplug

hey guys in today's visit to your life going to show you how you can design and assemble a simple spring shock absorber commonly used in two wheelers.
hope you guys will like this video, do comment any queries and don't forget to subscribe to my channel.

A shock absorber (in reality, a shock "damper") is a mechanical or hydraulic device designed to absorb and damp shock impulses. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated. Most shock absorbers are a form of dashpot.

In a vehicle, shock absorbers reduce the effect of traveling over rough ground, leading to improved ride quality and vehicle handling. While shock absorbers serve the purpose of limiting excessive suspension movement, their intended sole purpose is to damp spring oscillations. Shock absorbers use valving of oil and gasses to absorb excess energy from the springs. Spring rates are chosen by the manufacturer based on the weight of the vehicle, loaded and unloaded. Some people use shocks to modify spring rates but this is not the correct use. Along with hysteresis in the tire itself, they damp the energy stored in the motion of the unsprung weight up and down. Effective wheel bounce damping may require tuning shocks to an optimal resistance.

Видео Shock absorber | design and assembly | fusion 360 tutorials канала SPARK PLUG