Testing Your Stator on/off Your Bike

A quick tutorial on how to test your stator. This tutorial will work for any bike , but check with your service manual for the proper recommended readings. If you have an 04 / 05 Suzuki GSXR 750 like myself the service manual specifications recommends putting your digital multi-meter on the ohms setting and at the lowest setting possible. When testing your leads you should be within the range of .02- .09 ohms. For testing your stater well the bike is running for proper output voltage make sure the bike is cool before testing. Put your digital multi-meter on AC current and disconnect the stater connector and place your leads in each of the prongs within the connector. Start the bike and rev to 5000 RPMs , you should see a reading of 65 volts ac current. If you see Anything other then the service manual parameters then it's time for a new stater. Always be sure to have your digital multi-meter on the proper settings before making any connection or you risk the chance of frying the meter.

Hey, If any of my videos saved you a buck or two consider using the PayPal link below to donate one of the saved dollars to my channel. Your contributions help me bring you more valuable content that will continue to save you money. THANKS!

PayPal
https://www.paypal.me/thechemis

Видео Testing Your Stator on/off Your Bike канала james moreno