How To Make a Jigsaw Cutting Station | DIY Jigsaw Guide Cutting Station
In this video I'm showing how to make a jigsaw cutting station . A simple jigsaw guide cutting station but a great diytool around the shop.
► Subscribe to AllFlavor Workshop: https://bit.ly/2T9cIxD
I made a jigsaw cutting station that works as a jigsaw cutting guide as well as a jigsaw crosscut jig. The build is solid, it doesn't cost much and you can use it for a lot of workshop projects. The jigsaw cutting station lets you cut straight cuts up to 65cm, cross cuts and cuts at an arbitrary angle depending on how you adjust the guide rail. The jigsaw cutting guide is removable and you can use it without the cutting station - great for short and precise cuts. If needed you can easily mount it back on the jigsaw cutting station. You will need only few things to build this diy workshop tool - plywood, aluminium angles, bolts, nuts, T-nuts and a jigsaw. This homemade workshop tool is simple to make and it will help you with many projects. Watch the entire video for a step by step guide how to make a jigsaw cutting station and a jigsaw cutting guide.
HOW TO MAKE A JIGSAW CUTTING STATION | DIY JIGSAW GUIDE CUTTING STATION
I started out by building the jigsaw guide - cut the plywood and the aluminium angles for the jig. Attached those to the plywood base using a double sided tape, bolts and nuts. After that I drilled several sight holes in the base and after that I cut the slot in the jigsaw base (Note: cut the slot after having the sight holes ready).
For the jigsaw cutting station I cut the base board and elevated it with timber to make space for the jigsaw blade. I measured the position of the slot and attached the jigsaw cutting guide to the jigsaw station using T-nuts, threaded rods and wing nuts. I cut out the slot in the board using the jigsaw guide and marked several lines on the base and attached a guide rail on one of those for 90 degrees cross cuts. Additionally I mounted a removable flippable aluminium rail with a wing nut as a guide to be able to cut at an arbitrary angle. This jigsaw cutting station is a great homemade workshop tool.
TIMESTAMPS:
00:00 Showing the use of a jigsaw cutting station
01:07 Building the jigsaw cutting guide
02:05 Fixing the aluminium guide rails
07:01 Drilling sight holes and cutting the slot
07:49 Building the jigsaw cutting station
08:45 Fixing wooden legs
09:15 Positioning and fixing the jigsaw guide
10:53 Cutting the slot
11:25 Fixing 90 degree guide rail
12:35 Adjusting the angle guide rail
13:49 Testing the jigsaw cutting station
MATERIAL USED:
- Plywood base (45x75cm), plywood guide (11x75cm)
- Timber (2 - 12x3x4cm, 2 - 30x3x4cm)
- Aluminium Angles
- 4x16mm bolt, nuts, T-nuts, Wing nuts
- Wood Glue, Double sided tape
► Check out some of the other projects as well:
How To Make a Jigsaw Guide | Jigsaw Crosscut Jig
https://youtu.be/ba3ja1knc7w
Make a Self-Centering Doweling Jig | Diy Simple Dowel Jig
https://youtu.be/6qgdeiwe2LQ
Old Putty Knife Into Kiridashi | Hand Tool Transformation
https://youtu.be/M_YipJEF5Hc
► Follow me on:
Instagram - https://www.instagram.com/allflavorworkshop
If you have any thoughts or questions, let me know in the comments below and I will get back to you as soon as possible. I am not a professional but I like making something new with my hands. Any suggestion or advice is highly appreciated.
Subscribe to this channel so you don't miss anything.
Hit the bell, like the video and share it with anyone who would benefit from its content. See you in the next video.
► Subscribe To AllFlavor Workshop and Get More Great Tips:
https://bit.ly/2T9cIxD
Thank you all for watching and for your support.
#diytools #homemadetools #jigsaw #allflavorworkshop
----------------------------------------------------------------------
WARNING:
All information, processes and working procedures provided by AllFlavor Workshop is of a general nature and is furnished only for educational/entertainment purposes only. No information is to be taken as professional advice. You agree that use of this information is at your own risk and hold AllFlavor Workshop harmless from any and all losses, liabilities, injuries or damages resulting from any and all claims.
HAVE FUN BUT ALWAYS KEEP SAFE!
----------------------------------------------------------------------
how to make a jigsaw cutting station
how to make a jigsaw guide
diy jigsaw cutting station
jigsaw crosscut jig
diytools
shop made tools
homemade workshop tools
AllFlavor Workshop
Видео How To Make a Jigsaw Cutting Station | DIY Jigsaw Guide Cutting Station канала AllFlavor Workshop
► Subscribe to AllFlavor Workshop: https://bit.ly/2T9cIxD
I made a jigsaw cutting station that works as a jigsaw cutting guide as well as a jigsaw crosscut jig. The build is solid, it doesn't cost much and you can use it for a lot of workshop projects. The jigsaw cutting station lets you cut straight cuts up to 65cm, cross cuts and cuts at an arbitrary angle depending on how you adjust the guide rail. The jigsaw cutting guide is removable and you can use it without the cutting station - great for short and precise cuts. If needed you can easily mount it back on the jigsaw cutting station. You will need only few things to build this diy workshop tool - plywood, aluminium angles, bolts, nuts, T-nuts and a jigsaw. This homemade workshop tool is simple to make and it will help you with many projects. Watch the entire video for a step by step guide how to make a jigsaw cutting station and a jigsaw cutting guide.
HOW TO MAKE A JIGSAW CUTTING STATION | DIY JIGSAW GUIDE CUTTING STATION
I started out by building the jigsaw guide - cut the plywood and the aluminium angles for the jig. Attached those to the plywood base using a double sided tape, bolts and nuts. After that I drilled several sight holes in the base and after that I cut the slot in the jigsaw base (Note: cut the slot after having the sight holes ready).
For the jigsaw cutting station I cut the base board and elevated it with timber to make space for the jigsaw blade. I measured the position of the slot and attached the jigsaw cutting guide to the jigsaw station using T-nuts, threaded rods and wing nuts. I cut out the slot in the board using the jigsaw guide and marked several lines on the base and attached a guide rail on one of those for 90 degrees cross cuts. Additionally I mounted a removable flippable aluminium rail with a wing nut as a guide to be able to cut at an arbitrary angle. This jigsaw cutting station is a great homemade workshop tool.
TIMESTAMPS:
00:00 Showing the use of a jigsaw cutting station
01:07 Building the jigsaw cutting guide
02:05 Fixing the aluminium guide rails
07:01 Drilling sight holes and cutting the slot
07:49 Building the jigsaw cutting station
08:45 Fixing wooden legs
09:15 Positioning and fixing the jigsaw guide
10:53 Cutting the slot
11:25 Fixing 90 degree guide rail
12:35 Adjusting the angle guide rail
13:49 Testing the jigsaw cutting station
MATERIAL USED:
- Plywood base (45x75cm), plywood guide (11x75cm)
- Timber (2 - 12x3x4cm, 2 - 30x3x4cm)
- Aluminium Angles
- 4x16mm bolt, nuts, T-nuts, Wing nuts
- Wood Glue, Double sided tape
► Check out some of the other projects as well:
How To Make a Jigsaw Guide | Jigsaw Crosscut Jig
https://youtu.be/ba3ja1knc7w
Make a Self-Centering Doweling Jig | Diy Simple Dowel Jig
https://youtu.be/6qgdeiwe2LQ
Old Putty Knife Into Kiridashi | Hand Tool Transformation
https://youtu.be/M_YipJEF5Hc
► Follow me on:
Instagram - https://www.instagram.com/allflavorworkshop
If you have any thoughts or questions, let me know in the comments below and I will get back to you as soon as possible. I am not a professional but I like making something new with my hands. Any suggestion or advice is highly appreciated.
Subscribe to this channel so you don't miss anything.
Hit the bell, like the video and share it with anyone who would benefit from its content. See you in the next video.
► Subscribe To AllFlavor Workshop and Get More Great Tips:
https://bit.ly/2T9cIxD
Thank you all for watching and for your support.
#diytools #homemadetools #jigsaw #allflavorworkshop
----------------------------------------------------------------------
WARNING:
All information, processes and working procedures provided by AllFlavor Workshop is of a general nature and is furnished only for educational/entertainment purposes only. No information is to be taken as professional advice. You agree that use of this information is at your own risk and hold AllFlavor Workshop harmless from any and all losses, liabilities, injuries or damages resulting from any and all claims.
HAVE FUN BUT ALWAYS KEEP SAFE!
----------------------------------------------------------------------
how to make a jigsaw cutting station
how to make a jigsaw guide
diy jigsaw cutting station
jigsaw crosscut jig
diytools
shop made tools
homemade workshop tools
AllFlavor Workshop
Видео How To Make a Jigsaw Cutting Station | DIY Jigsaw Guide Cutting Station канала AllFlavor Workshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to make Jigsaw Table Machine || DIY Jigsaw Table 【JSK】Make A Jigsaw Guide Track || DIY Jigsaw Straight And Crosscut JigJigsaw Cutting Station Version 2 / For fast Cutting / Homemade - DIYJigsaw Cutting Station - Dekupaj Testere Kesim TezgahıHow To Make a Ruler Marking Gauge | Woodworking Marking ToolsMake Adjustable Router Guide Jig | Perfect Dados & GroovesHow To Use A Jigsaw | Tips & TricksHow to use a Jigsaw - BasicsDIY Jigsaw Cutting Station🟢 Homemade Track Saw - DIY Guide Rail for Circular Saw2 in 1 Jigsaw Track Guide & Cutting stationHow to make JIGSAW Cutting Station - PERFECT corner cuttingBuilding a Jigsaw Cutting Station - Dekupaj Testere Kesim TezgahıMake a Drill Press Stand | Drill Press Stand DIYDIY:Simple circular saw guideJigsaw Cutting Station - Homemade - DIY - Jigsaw Guide5 Amazing Woodworking Tools Hacks | Tips & TricksHow to Make 3 in 1 Circular Saw, Jigsaw and Router Jig / Ahşap İşleme Kesim İstasyonuDIY Making Easy Circle Cutting Jig for JigsawSuper Simple Track Saw