How To Remove The Turbo From BMW E90/E91 320d/E87 120d E60 E61 520d | M47 Engine STEP BY STEP GUIDE!

Hello my fellow BMW DIYers!
After scanning the internet and not being able to find one single video that shows the EXACT Step By Step removal process of the turbocharger placed in the M47 Engine "M47TU2D20"(found in the E90, E91 320D ,E87 120D, E60/E61 520D).
I decided to get to work and present you with this video.
There is information scattered all around and it can be quite confusing and it usually takes hours to compile and use.
Thanks for watching! I hope this video helped you!

TOOLS FOR THE JOB:
WORKPRO 172-piece 1/2", 1/4" and 3/8" Drive Metric Socket Set
https://amzn.to/3rnxOLs

Draper 09783 5-Piece Soft-Grip Screwdriver Set
https://amzn.to/32XLvHD

Sealey S0718 Extension Bar Set, 1/4"
https://amzn.to/3Hv0Tu6

Draper 64534 Torque Wrench 3/8 Inch (10-80Nm)
https://geni.us/D523syr

Draper 30357 Torque Wrench, 1/2" (30Nm-210Nm)
https://amzn.to/3gpXII0

Rolson Tools 60379 Magnetic Pick Up Tool
https://amzn.to/3GrFGQp
------------
TO LIFT THE CAR (if you own a BMW, you’ll need a low profile jack)
Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
https://amzn.to/3GrFDUJ

Heavy Duty Foldable Axle Jack Stands 3 Tons
https://amzn.to/3J805f7

Draper 54500 Rubber Wheel Chock
https://amzn.to/35QOzGz

USB LED Rechargeable Inspection Work Light
https://amzn.to/3rtkkhq

Silverline 871414 Magnetic Parts Dish
https://amzn.to/3B1NGXk
------------
FOR THE OIL CHANGE
Draper 13449 Expert Oil Filter Cap Socket, 3/8" Square Drive, 36mm
https://amzn.to/3AVRYiK

Sealey DRP02 Oil/Fluid Drain Pan, 7.6L
https://amzn.to/3Ld46R2
------------
REPLACEMENT PARTS
AIR INTAKE HOSE PIPE (Polypropylene)
https://amzn.to/3Hx56NO

Air Snorkel
(Part connected to side of the air filter housing)
Search on EBAY for OEM Part: 13717797956

**MUST BE CHANGED WHEN CHANGING TURBO**
Crankcase Oil Breather Filter (Febi)
https://amzn.to/3J2lXbB

OIL CHANGES ARE AN ABSOLUTE MUST, WHEN REPLACING THE TURBO!
MANNOL Energy 5W30 Engine Oil (Perfect for engine/turbo flushes) after replacement:
https://amzn.to/3gq02Pf

Castrol Oil 5W-30 C3 --- BMW Longlife-04 standard (for every day use)
https://amzn.to/3GrpLS7

Please be aware of the following statement: The torque specs have been taken from various sources – ISTA+, Manuals and forums – based on my meticulous method of elimination, I’ve carefully listed the torques specs in the video but I want you to take them with a grain of salt and do your own research if need be!

PS: PLEASE REMEMBER that removing the turbo is only 1/3rd of the battle! You’ll need to replace the gaskets, v-band clamps, oil/oil filter and crankcase oil breather and its own filter. The last thing you want to end up with is a spanking brand-new turbo (or professionally refurbished) installed badly with air and oil leaks followed by oil starvation or contamination! Protecting it is also quite the mission!
Good luck to you all!

Видео How To Remove The Turbo From BMW E90/E91 320d/E87 120d E60 E61 520d | M47 Engine STEP BY STEP GUIDE! канала Martin Lambov