Are You High Passing At The Wrong Frequency?
➡️➡️Learn more about High Passing correctly here: https://producelikeapro.com/blog/are-you-high-passing-at-the-wrong-frequency/
➡️➡️Get the Yamaha Revstar 'Guitar of the Week' here: https://imp.i114863.net/vnP2oW
➡️➡️Learn more about the wonderful Al Schmitt and his career here: https://youtu.be/oEhBQM8l9iM
Are you high passing at the wrong frequency?
It is a common misconception that the vinyl record production process differs from CD’s, DVD’s, Wav’s, etc. and that these formats are not able to handle lower frequencies.
People use to mix in the studio with huge speakers with tons of low end, and they would love it. Then, depending on the mastering engineer, they would remove a lot of that low end for vinyl.
There are a few reasons for this.
Physicality; the more low end a song had, meant that the grooves needed to be wider and bigger. Super low frequencies on vinyls make really huge grooves, meaning dub tracks, reggae songs, etc. didn’t translate very well onto vinyl when there was maybe 20 minutes a side.
Back then, most records had 15-20 minutes a side, so they would wipe out the low end so that a song wouldn’t take up all of this prime real estate. Plus, super low frequencies could make the stylus/needle pop off the vinyl.
CD was the first time they were able to preserve the low end that the mixes were giving them.
You shouldn’t make your records any differently because they are or aren’t going on vinyl; you should make them sound as amazing as possible, and then give it to the mastering engineer to master for the format!
❤️My Favorite Plugins:
➡️Waves MV2: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/mv2%23make-tracks-cut-through-the-mix-with-mv2
➡️Waves RBass: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/renaissance-bass
➡️Renaissance Vox: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/renaissance-vox
➡️Renaissance Compressor: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/renaissance-compressor
➡️Warren Huart IR Pack https://lancasteraudio.com/shop/ir-packs/warren-huart-ir-pack/
➡️Warren Huart Kemper Pack https://lancasteraudio.com/shop/kemper-packs/warren-huart-kemper-pack/
❤️GEAR:
➡️Stealth Sonics: https://stealthsonics.com/?aff=3
➡️UK Sound 1173: https://vintageking.com/uk-sound-1173?utm_source=warrenhuart&utm_campaign=uk1173&utm_content=uk1173
➡️Apollo x16: https://u.audio/apollox16-plap
➡️Apollo Twin: https://u.audio/apollotwin-plap
Join the community here:
Facebook Group
https://www.facebook.com/groups/producelikeapro/
Facebook Page:
https://www.facebook.com/producelikeapro/
Instagram
https://www.instagram.com/producelikeapro/
Twitter
https://twitter.com/producelikeapro
❤️❤️Free 3 Part Mixing Course:
https://www.youtube.com/watch?v=jrvyoER4Rx0&list=PLnLOmVwRMCqRuyPHQct9DfJ8o4mMNxFTb&index=1
Sign up here to get exclusive videos and content http://producelikeapro.com
#ProduceLikeAPro
#HomeRecording
Giveaway Winners: https://www.producelikeapro.com/giveaway-winners/
Produce Like A Pro is a website which features great tips to help the beginning recordist make incredible sounding home recordings on a budget.
00:00 Start
01:49 Guitar of the Week & Am I High Passing At The Wrong Frequency?
05:05 Am I High Passing At The Wrong Frequency?
08:33 How Do We Determine The Proper Volume When Mixing On Headphones?
14:21 Al Schmitt Tribute
Видео Are You High Passing At The Wrong Frequency? канала Produce Like A Pro
➡️➡️Get the Yamaha Revstar 'Guitar of the Week' here: https://imp.i114863.net/vnP2oW
➡️➡️Learn more about the wonderful Al Schmitt and his career here: https://youtu.be/oEhBQM8l9iM
Are you high passing at the wrong frequency?
It is a common misconception that the vinyl record production process differs from CD’s, DVD’s, Wav’s, etc. and that these formats are not able to handle lower frequencies.
People use to mix in the studio with huge speakers with tons of low end, and they would love it. Then, depending on the mastering engineer, they would remove a lot of that low end for vinyl.
There are a few reasons for this.
Physicality; the more low end a song had, meant that the grooves needed to be wider and bigger. Super low frequencies on vinyls make really huge grooves, meaning dub tracks, reggae songs, etc. didn’t translate very well onto vinyl when there was maybe 20 minutes a side.
Back then, most records had 15-20 minutes a side, so they would wipe out the low end so that a song wouldn’t take up all of this prime real estate. Plus, super low frequencies could make the stylus/needle pop off the vinyl.
CD was the first time they were able to preserve the low end that the mixes were giving them.
You shouldn’t make your records any differently because they are or aren’t going on vinyl; you should make them sound as amazing as possible, and then give it to the mastering engineer to master for the format!
❤️My Favorite Plugins:
➡️Waves MV2: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/mv2%23make-tracks-cut-through-the-mix-with-mv2
➡️Waves RBass: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/renaissance-bass
➡️Renaissance Vox: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/renaissance-vox
➡️Renaissance Compressor: https://waves.7eer.net/c/1205870/286864/4512?u=https://www.waves.com/plugins/renaissance-compressor
➡️Warren Huart IR Pack https://lancasteraudio.com/shop/ir-packs/warren-huart-ir-pack/
➡️Warren Huart Kemper Pack https://lancasteraudio.com/shop/kemper-packs/warren-huart-kemper-pack/
❤️GEAR:
➡️Stealth Sonics: https://stealthsonics.com/?aff=3
➡️UK Sound 1173: https://vintageking.com/uk-sound-1173?utm_source=warrenhuart&utm_campaign=uk1173&utm_content=uk1173
➡️Apollo x16: https://u.audio/apollox16-plap
➡️Apollo Twin: https://u.audio/apollotwin-plap
Join the community here:
Facebook Group
https://www.facebook.com/groups/producelikeapro/
Facebook Page:
https://www.facebook.com/producelikeapro/
https://www.instagram.com/producelikeapro/
https://twitter.com/producelikeapro
❤️❤️Free 3 Part Mixing Course:
https://www.youtube.com/watch?v=jrvyoER4Rx0&list=PLnLOmVwRMCqRuyPHQct9DfJ8o4mMNxFTb&index=1
Sign up here to get exclusive videos and content http://producelikeapro.com
#ProduceLikeAPro
#HomeRecording
Giveaway Winners: https://www.producelikeapro.com/giveaway-winners/
Produce Like A Pro is a website which features great tips to help the beginning recordist make incredible sounding home recordings on a budget.
00:00 Start
01:49 Guitar of the Week & Am I High Passing At The Wrong Frequency?
05:05 Am I High Passing At The Wrong Frequency?
08:33 How Do We Determine The Proper Volume When Mixing On Headphones?
14:21 Al Schmitt Tribute
Видео Are You High Passing At The Wrong Frequency? канала Produce Like A Pro
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Clean Up A Muddy Mix!Songs That Changed Music: The Who - My Generation6 Free Mixing Tricks (that don't cost anything!)The history of the Pultec EQ low end trickSongs That Changed Music: The Kinks - You Really Got MeDon't Do Me Like That - Tom Petty & The Heartbreakers: Inside the Song w/ Shelly YakusCompressor Designer GEEKS OUT on DRUM COMPRESSION!Misha Mansoor: Periphery Founder & GuitaristSongs That Changed Music: Hong Kong Garden - Siouxsie and the BansheesSongs That Changed Music: Thin Lizzy - The Boys Are Back In TownHow do you avoid using too many tracks in a song?8 Tips for Amazing Low End!The 5 Rules Of MixingRecreating The Beatles Tones with Clay Blair at Boulevard Recording - Warren HuartSongs that Changed Music: Peter Gabriel - SledgehammerDo You Leave Enough Headroom in Your Mixes?Master Bus Compression: Hardware vs. PluginsAutomations & Transitions: Take Your Mix to the Next Level - Marc Daniel NelsonEngineering for Aerosmith & Van Halen! - Mike PlotnikoffMAGIC IS IN THE MIDRANGE (mix tutorial)