This is what you will need to refill your PRO 100 CLI 42 carts

When you go got the precisioncolors PRO-100 page you will many a set. The best and most recommended on would the third one down the list.
You will need the Resetter
You will need the 2 ounce NEWEST ink set
You will need the 5/32" diameter drill bit to enlarge the factory hole to accept the fill plugs.
You will need the purged and pre modified replacement for the original YELLOW carts.
You SHOULD get the needle caps for the bottles. Much easier than syringes
You should get the special cart clips.
The kit with come with the fill plugs and the little tool to remove the ball.

Do not buy more ink that what you think you will need for 6 months. You will very likely need extra Gray and Light Mag and Light Cyan .

-~-~~-~~~-~~-~-
Please watch: "EPSON P800 Chip Decoder unfortunately DID NOT WORK!"
https://www.youtube.com/watch?v=RWZiqDMwqv8
-~-~~-~~~-~~-~-

Видео This is what you will need to refill your PRO 100 CLI 42 carts канала Jose Rodriguez