BMW 335 N54 water pump removal + tips N tricks.

In this video I remove my failed N54 (continental) water pump for the third time. I go over how to remove this pump, where it’s failing and a solution so this doesn’t happen again.

Consider subscribing if you enjoyed this content, or found it helpful. 👍
Tools I used 👇

Jack stand+jack
Drain bucket for coolant
BMW coolant
Flash light
Rags? Old T shirts?

(1/2” Drive)
16/17mm deep socket 1/2”
1/2” ratchet

(3/8” Drive)
3/8” ratchet
T20/T25
10mm socket deep or shallow
E12 torx socket
13mm socket deep or shallow
3” extension
2” wobble extension

(1/4” drive)
1/4” ratchet
6mm socket shallow or deep
4” extension
2” extension

Flat head screw driver
Pick 90’
10mm wrench (12point box end)
10mm ratcheting wrench (not needed but will HELP!)
Channel lock pliers.

*will power & patience*

Hope this helped!

Instagram @ Kamblxxk
**Disclaimer**
KamShaft assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained on this channel is provided on an "as is" basis with no guarantees of completeness, accuracy, usefulness or timeliness

Видео BMW 335 N54 water pump removal + tips N tricks. канала Kamshaft