How to Install H4 LED "Sealight" Headlight on Your Bike - Step-by-Step Instructions for VN900

In this video I show step-by-step instructions how to install the "Sealight" H4/9003 LED Headlight (Amazon.com: https://amzn.to/3RCZfuO or Amazon.ca: https://amzn.to/3AWjFts) on Your Motorcycle. I install it on my Kawasaki Vulcan 900 Classic.

Motorcycle in the video:
2015 Kawasaki Vulcan 900 Classic SE

Maintenance instructions in this video are applicable to the following motorcycles:
2006-2022 Kawasaki Vulcan 900 Classic
2006-2022 Kawasaki Vulcan 900 Classic LT

How to make a $20 Jack video: https://youtu.be/CWeI_B0fjI8

Check other helpful videos:
How to Replace a Battery on Kawasaki Vulcan 900: https://youtu.be/PwQyfNHYEFw
Rear Spring Preload on Kawasaki Vulcan 900 - Step-by-step Instructions & How it Works: https://youtu.be/bibf5T3v-sU
How to Replace an Air Filter on Kawasaki Vulcan 900 - Step-by-step Instructions: https://youtu.be/NJUf1kwk7mw

Here is a link where you can buy this light:
https://www.amazon.com/SEALIGHT-Motorcycle-Headlight-Conversion-Approved/dp/B071Z7RHYM?crid=146A9RO40DC8N&keywords=%22Sealight%22+H4%2F9003+LED+Headlight&qid=1662255723&sprefix=sealight+h4%2F9003+led+headlight%2Caps%2C115&sr=8-8&linkCode=ll1&tag=kmaxvideo05-20&linkId=1cd41535c96865e7c47cba26d2f43ccd&language=en_US&ref_=as_li_ss_tl
or
https://www.amazon.ca/Motorcycle-Headlight-Conversion-Approved-SEALIGHT/dp/B071Z7RHYM?crid=31M7B36V42HG1&keywords=H4+9003+LED+motorcycle+bulb&qid=1661914385&s=automotive&sprefix=h4+9003+led+motorcycle+bulb%2Cautomotive%2C77&sr=1-4&linkCode=ll1&tag=kmaxvideo-20&linkId=841959ecb9782dc33f64332a7698d046&language=en_CA&ref_=as_li_ss_tl

00:00 Intro
00:36 "Sealight" H4/9003 LED – the light I will install
01:08 How we are going to do it?
01:16 Securing the bike with the $20 DIY jack
01:38 Disassembling the headlight
02:42 Removing the original headlight bulb
03:15 Don’t forget to subscribe :)
03:29 Installing a new LED bulb into the headlight
04:42 Re-assembling and installing the headlight
05:23 "Sealight" H4/9003 LED Specifications
06:22 The difference before and after
07:39 Thank you!

I was looking for a good LED Headlight conversion kit for my Kawasaki Vulcan 900 Classic for a while, and then I came across on Amazon with this one, "Sealight" H4/9003 LED Motorcycle Headlight. I decided to give it a shot. Let's install and see if it is going to make any difference.

Step 1:
- We need to disassemble the headlight and remove the old bulb.
- Secure the motorcycle on a level surface. I use my $20 stand for that. The link to the video showing how I did the jack is at the top right of the screen as well as in the description.
- Remove the headlight trim screws from both sides of the headlight shell.
- Pull out the bottom of the trim ring and remove it from the headlight shell.
- Disconnect the electrical connector from the backside of the original bulb and remove the lens unit.
- Remove the rubber cover from the back of the headlight lens unit.
- Unlock this clip and remove the light bulb. Don't touch it with your hands. You might reuse it at some point and you don't want to have any residual of skin oil or grease on the bulb glass as it is not good for it.
Step 2:
- Now we will install a new LED bulb. I'll talk about the bulb itself a bit later, so stay tuned.
- Press downward and take off LED bulb's ring turning it anti-clockwise.
- Put the LED bulb's ring into the lens unit and lock it with the clip.
- Install the rubber cover back onto the lens unit.
- Insert the LED bulb into the slot correctly positioning it, press down and then turn clockwise to lock it in place. Make sure that this part looks to the right if you are facing the front of the lens.
- Now connect the three-wire plug. Make sure it is tight.
Step 3:
- Install the lens unit and the trim back into the headlight shell. It is simple we just revers the removal steps.
About the LED bulb:
- Now lets talk about this LED bulb a bit. I will show you the difference how these two bulbs are lighting the road in a coupe of minutes.
- OK, here is a box with the LED bulb. For Kawasaki Vulcan 900 you need to buy model H4, series S1.
- As per specifications it clams that the color temperature is 6,000 Kelvin which is considered a cool white light color.
- Operating temperature is from -40C to +85C that is pretty good.
- It also says it is IP67 waterproof, as well as shock proof.

#KMaxVideo
#KawasakiVulcan
#Vulcan900

Intro Music:
I Can Feel it Coming by Kevin MacLeod
Link: https://incompetech.filmmusic.io/song...
License: http://creativecommons.org/licenses/b...

バルカン900

Видео How to Install H4 LED "Sealight" Headlight on Your Bike - Step-by-Step Instructions for VN900 канала K Max Video