Ultrasonic Levitation

Acoustic levitation meets Schlieren optics: By reflecting a sound wave back onto itself, one can secure a standing wave if the distance between the source of the sound and the reflector is equal to an integral number of half wavelengths. In this demonstration we use 28 kHz ultrasound whose wavelength in air is 1.2 cm.

Styrofoam balls of approximately 2mm in diameter can be levitated in this standing wave at the pressure antinodes. This is because the air is moving rapidly back-and-forth in the low pressure regions, thus pushing the ball into the high pressure region where the air is moving minimally. We can see the position of the balls relative to the pressure anti-nodes with the aid of our Schlieren optics set-up.

Images employing Schlieren optics are very sensitive to changes in the density of air, and these changes refract light into the camera. The air is more dense at the pressure antinodes of the acoustic standing wave and shows up as a band of light in the image. For more information on our Schlieren optics set-up, see
http://sciencedemonstrations.fas.harvard.edu/presentations/schlieren-optics

Although 28 kHz is beyond the range of human hearing, ear protection should be worn whenever attempting this experiment to avoid damaging vibrations in parts of the ear.

Видео Ultrasonic Levitation канала Harvard Natural Sciences Lecture Demonstrations