Fixing a digital oven timer module.
This timer module is a very common component used in a wide range of European ovens and possibly in other parts of the world too. It seems to be prone to progressive failure, with the display getting dimmer and dimmer until it just stops working completely.
A replacement unit costs anywhere between £40 and £100 depending on where you buy it, and if you get an appliance service engineer in to change it the cost will be even higher.
These things are easy to change. Once accessed they simply unclip and the connections are a few spade terminals that just pull off. As usual, you should take a picture of the way the wires are connected before disconnecting them. But in this module there were just four wires. Live and neutral to power the unit and two connections to the relay contacts that obviously switched power to the oven.
In this case the metallised film X2 capacitor used as a capacitive dropper power supply had dropped in value from its original 330nF to just 56nF which meant there simply wasn't enough power to run the clock/timer circuitry any more. Note that for different styles of timer (some have two relays) and different supply voltages, the dropper capacitors value may be different.
If you enjoy my videos you can help support the channel with a dollar for coffee, cookies and replacement capacitors at https://www.patreon.com/bigclive
Видео Fixing a digital oven timer module. канала bigclivedotcom
A replacement unit costs anywhere between £40 and £100 depending on where you buy it, and if you get an appliance service engineer in to change it the cost will be even higher.
These things are easy to change. Once accessed they simply unclip and the connections are a few spade terminals that just pull off. As usual, you should take a picture of the way the wires are connected before disconnecting them. But in this module there were just four wires. Live and neutral to power the unit and two connections to the relay contacts that obviously switched power to the oven.
In this case the metallised film X2 capacitor used as a capacitive dropper power supply had dropped in value from its original 330nF to just 56nF which meant there simply wasn't enough power to run the clock/timer circuitry any more. Note that for different styles of timer (some have two relays) and different supply voltages, the dropper capacitors value may be different.
If you enjoy my videos you can help support the channel with a dollar for coffee, cookies and replacement capacitors at https://www.patreon.com/bigclive
Видео Fixing a digital oven timer module. канала bigclivedotcom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Inside a 22mm digital panel indicator/voltmeter.Oven/Cooker Timer buzzing (HowTo Fix/Stop)How to Diagnose Problems with your OvenHow cooker oven Thermostats work & how to replaceHow to make Timer Module for Spot Welder at Home✨ OVEN TOUCHSCREEN NOT WORKING — EASY FIX ✨HDD broken? - DON' T THROW THAT AWAY!!! here is a BIG IDEAFascinating failure mode of metallised film capacitors.Teardown of a Philips 2W LED GU10 lamp.Testing and Cleaning a Dualit 3 slice toaster that I found in a skip: model 3SLUKInside a cheapo NiMh charger with schematic.Microwave Oven Troubleshooting in MINUTES ~ STEP BY STEPPower Factor Explained - The basics what is power factor pfHow to bypass your oven timer (oven wont turn on)A look inside a rather unusual LED pygmy lamp.How to make a Simple and Cheap Timer SwitchHow to Replace an Oven TimerHow to Fix Magic Chef Wine Fridge Won't Cool Easy DIY Refrigerator Repair(Flashing content.) Repair of strobing LED power supply.