How to Flow Coat

Flow Coating is a great way to achieve the best gloss and depth from your paint, the basic process is to paint your panel with base and clear then allow it to cure for at least 3 days then sand it back down and apply a further 2-3 coats of clear. Watch this tutorial video and I will include loads of tips tricks and mathods for best results, I will be using the SATAjet 5000-B RP 1.3mm Digital spray gun on my own VL Walkinshaw molded bonnet, I am using Standox HS clear heated to help the drying and also thin it without too much reducer.

Learn how to Spray Paint like a Pro by following this step by step guide to Automotive Refinishing.

For a full write up and photos see my website through this link http://thegunman.net.au/

To keep up to date with all my latest work Subscribe to my Channel and give my Facebook page a like by clicking this link
https://www.facebook.com/pages/The-Gunman/214940068707221?ref=hl

If you would like to see some unedited raw footage of my work then visit my other channel The Gunman RAW https://www.youtube.com/channel/UCX78Fondm-s1hSEE8BoOSuA

Instagram
https://instagram.com/the__gunman/

Follow me on Twitter through this link
https://twitter.com/GunmanThe

Flickr
https://www.flickr.com/photos/132343999@N03/

Tumblr
https://www.tumblr.com/blog/the-gun-man

Vine
https://vine.co/u/1196001495557058560

Видео How to Flow Coat канала The Gunman