Testing The Plastikov
You guys have been asking nonstop, so here it is. This was our recent experience with the Plastikov. I could share the link, but I’m confident youtube would instantly remove this video if I did, so you’ll have to google that.
We are probably going to try this again to verify results. We printed this on an Ender 3, at the suggested 45 degree angle using PLA+ at 95% infill. Rails were provided by a keybase user I incorrectly identified as Ivan, but rather someone making rails that was trying to help us with the video.
----
About Me
My name is Brandon Herrera. I'm the owner and operator of The AK Guy Inc, a 07 Firearm Manufacturer based out of Fayetteville, NC. I also co-own Stark Media Group, and designed the rifle known as the AK-50.
I've started to dedicate this YouTube channel above all to have fun, but also as a way to document my entrepreneurial journey for the next few years as I try to grow my companies. Hopefully, people can learn from my example, successes, and failures.
Either way, I'm having a lot of fun with it so far, and I hope it's just as fun to follow along!
----
You Can Also Follow Me Here:
Second Channel: https://www.youtube.com/channel/UCNB4XPkbXxdqQTmxWzJ9w1g
Instagram: @RealBrandonHerrera.
Facebook: Facebook.com/RealBrandonHerrera/
Видео Testing The Plastikov канала Brandon Herrera
We are probably going to try this again to verify results. We printed this on an Ender 3, at the suggested 45 degree angle using PLA+ at 95% infill. Rails were provided by a keybase user I incorrectly identified as Ivan, but rather someone making rails that was trying to help us with the video.
----
About Me
My name is Brandon Herrera. I'm the owner and operator of The AK Guy Inc, a 07 Firearm Manufacturer based out of Fayetteville, NC. I also co-own Stark Media Group, and designed the rifle known as the AK-50.
I've started to dedicate this YouTube channel above all to have fun, but also as a way to document my entrepreneurial journey for the next few years as I try to grow my companies. Hopefully, people can learn from my example, successes, and failures.
Either way, I'm having a lot of fun with it so far, and I hope it's just as fun to follow along!
----
You Can Also Follow Me Here:
Second Channel: https://www.youtube.com/channel/UCNB4XPkbXxdqQTmxWzJ9w1g
Instagram: @RealBrandonHerrera.
Facebook: Facebook.com/RealBrandonHerrera/
Видео Testing The Plastikov канала Brandon Herrera
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Can A 3D Printed Suppressor Work?Let’s Make AK Shoot SMOL BOOLETThe Worst Internet Gun FailsEXTREMELY CURSED GUN IMAGESVSKA 6,000 Round Test (W/MrGunsNGear)“The Vityaz” - The MP5 of RussiaSAIGA 12 - RUSSIAN AK SHOTGUNAK-47 vs AK-74: What's The Difference?Plastic Defence: Secret 3D Printed Guns in EuropeThe PPSH-41: How It REALLY Works3D Printed CZ Scorpion Evo 3!!!Gun Builder Reacts to Kalashnikov: The MovieMY FIRST AR BUILD (With No Instructions)3D Printing a [REDACTED]: Getting StartedDid the AK47 Copy the STG-44?3D PRINTED CURSED GUN IMAGESMy start with 3D Printing firearms...We Built an AK in 6.5 GrendelThe Worst Internet Gun Fails #3 - The Darwin AwardsBurying an AK-47 for a Month?!?