How to Make Lathe Chuck. 4-jaw Lathe Chuck for Woodturn. Woodworking
How to make a 4 jaw lathe chuck using plywood
#michaelpaley
Ad cogitandum et agendum homo natus est
A chuck is a specialized type of clamp. It is used to hold an object with radial symmetry, especially a cylinder. In drills and mills it holds the rotating tool whereas in lathes it holds the rotating workpiece. On a lathe the chuck is mounted on the spindle which rotates within the headstock. For some purposes (such as drilling) an additional chuck may be mounted on the non-rotating tailstock.
Many chucks have jaws, (sometimes called dogs) that are arranged in a radially symmetrical pattern like the points of a star. The jaws are tightened up to hold the tool or workpiece. Often the jaws will be tightened or loosened with the help of a chuck key, which is a wrench-like tool made for the purpose. Many jawed chucks, however, are of the keyless variety, and their tightening and loosening is by hand force alone. Keyless designs offer the convenience of quicker and easier chucking and unchucking, but have lower gripping force to hold the tool or workpiece, which is potentially more of a problem with cylindrical than hexagonal shanks. Some lathe chucks have independently moving jaws which can also hold irregularly shaped objects (ones that lack radial symmetry). Collet chucks, rather than having jaws, have collets, which are flexible collars or sleeves that fit closely around the tool or workpiece and grip it when squeezed. A few chuck designs are more complex yet, and they involve specially shaped jaws, higher numbers of jaws, quick-release mechanisms, or other special features.
Some chucks, such as magnetic chucks and vacuum chucks, are of a different sort from the radially symmetrical mechanical clamps mentioned above. Instead, they may be surfaces (typically flat) against which workpieces or tools are firmly held by magnetic or vacuum force.
WoodWorking Tools
Видео How to Make Lathe Chuck. 4-jaw Lathe Chuck for Woodturn. Woodworking канала Michael Paley
#michaelpaley
Ad cogitandum et agendum homo natus est
A chuck is a specialized type of clamp. It is used to hold an object with radial symmetry, especially a cylinder. In drills and mills it holds the rotating tool whereas in lathes it holds the rotating workpiece. On a lathe the chuck is mounted on the spindle which rotates within the headstock. For some purposes (such as drilling) an additional chuck may be mounted on the non-rotating tailstock.
Many chucks have jaws, (sometimes called dogs) that are arranged in a radially symmetrical pattern like the points of a star. The jaws are tightened up to hold the tool or workpiece. Often the jaws will be tightened or loosened with the help of a chuck key, which is a wrench-like tool made for the purpose. Many jawed chucks, however, are of the keyless variety, and their tightening and loosening is by hand force alone. Keyless designs offer the convenience of quicker and easier chucking and unchucking, but have lower gripping force to hold the tool or workpiece, which is potentially more of a problem with cylindrical than hexagonal shanks. Some lathe chucks have independently moving jaws which can also hold irregularly shaped objects (ones that lack radial symmetry). Collet chucks, rather than having jaws, have collets, which are flexible collars or sleeves that fit closely around the tool or workpiece and grip it when squeezed. A few chuck designs are more complex yet, and they involve specially shaped jaws, higher numbers of jaws, quick-release mechanisms, or other special features.
Some chucks, such as magnetic chucks and vacuum chucks, are of a different sort from the radially symmetrical mechanical clamps mentioned above. Instead, they may be surfaces (typically flat) against which workpieces or tools are firmly held by magnetic or vacuum force.
WoodWorking Tools
Видео How to Make Lathe Chuck. 4-jaw Lathe Chuck for Woodturn. Woodworking канала Michael Paley
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![DIY Power File. Homemade Drill Powered Round Power File](https://i.ytimg.com/vi/NzzlVYv2P-k/default.jpg)
![Restoration Torque Converter Rusty | Restoration gearbox ship old | Restore transmission](https://i.ytimg.com/vi/I9l3TqF_CO4/default.jpg)
![Homemade Lathe Machine](https://i.ytimg.com/vi/a6a5HTsYCSY/default.jpg)
![How to make a 3-ways dowel jig](https://i.ytimg.com/vi/B8CJjAOa-D0/default.jpg)
![Самодельная планшайба. Homemade faceplate for lathe](https://i.ytimg.com/vi/f6-aA3AwTm8/default.jpg)
![Making a 4-jaw lathe chuck](https://i.ytimg.com/vi/NvGP-gD5zFU/default.jpg)
![Membuat Cekam Bubut Dari Teromol Mobil Pakai Baut Bisa Bongkar Pasang](https://i.ytimg.com/vi/rlgOIPMp3Eo/default.jpg)
![Woodturning: The Burl of Insanity!](https://i.ytimg.com/vi/qjOjFovJBYM/default.jpg)
![4 USEFUL HOMEMADE TOOLS IDEAS || 4 DIY HOMEMADE TOOLS || DIY WELDING TOOLS](https://i.ytimg.com/vi/Byz2eqRtFJc/default.jpg)
![Wooden Lathe Making 1 - DIY](https://i.ytimg.com/vi/b-c00a7C3SI/default.jpg)
![OLD TECHNOLOGY SERIES #1 Lathe Chuck tubalcain mrpete222](https://i.ytimg.com/vi/cSEXqgsI780/default.jpg)
![Woodturning trick YOU'VE NEVER SEEN BEFORE](https://i.ytimg.com/vi/JSEVwvrpewE/default.jpg)
![🔴 Mini TORNO CASERO / TORNO para MADERA con un TALADRO + CONTRAPUNTA GIRATORIA ✔️](https://i.ytimg.com/vi/QjZklmYR_mY/default.jpg)
![10 Common Wood Turning Mistakes](https://i.ytimg.com/vi/YybjAs5T_r8/default.jpg)
![Placa 4 Castanhas - Independent Four Jaws Chuck](https://i.ytimg.com/vi/yci6tmcghXQ/default.jpg)
![Homemade Lathe Machine Using Washing Machine Motor](https://i.ytimg.com/vi/lkxkPXm6UFc/default.jpg)
![Woodworking Extremely Dangerous||Giant Woodturning|Skills & Techniques Working With Giant Wood Lathe](https://i.ytimg.com/vi/aw_ZZCr6onA/default.jpg)
![Making a Homemade Lathe Chuck - Torna Aynası Yapımı](https://i.ytimg.com/vi/wBBJ_rnUcf0/default.jpg)
![Making a folding spindle moulder fence](https://i.ytimg.com/vi/P7JsJF5VizI/default.jpg)
![Как сделать самодельный патрон для токарного по дереву.DIY](https://i.ytimg.com/vi/oiyaOlYsGX8/default.jpg)