Building a Tesla ELECTRIC BIKE For my WIFE

Tom's 3D-Printed BIKE~ https://www.youtube.com/watch?v=9rIIJbDkpN8&t=11s
Follow-up Q&A video: https://www.youtube.com/watch?v=IzK121RzC88
_________________________________________________________________
DIY Electric Bike - Parts list
3D print designs: http://www.thingiverse.com/thing:2191603
WREN'S 3D PRINTER~ http://bit.ly/Wrens_3D_PRINTER

The VESC (Speed controller) - http://diyelectricskateboard.com/diy-electric-skateboard-kits-parts/vesc-the-best-electric-skateboard-esc/
VESC setup links: http://www.electric-skateboard.builders/t/new-vesc-user-read-this-complete-walktrough-of-the-vesc/2980
http://www.electric-skateboard.builders/t/vesc-faq-when-to-use-low-voltage-vesc-configuration/1965
http://www.electric-skateboard.builders/t/vesc-faq-easy-vesc-configuration-in-windows-mac-for-noob/2963
http://www.electric-skateboard.builders/t/vedders-vesc-6-0/3813

Bike: http://bit.ly/Wrens_BIKE
Motor: https://hobbyking.com/en_us/turnigy-aerodrive-sk3-6374-149kv-brushless-outrunner-motor.html/?___store=en_us
Saddle Bag (for battery): http://bit.ly/Battery_Pouch
Throttle Handlebar: http://bit.ly/Bike_Throttle
Batteries: 6 cell (6s=22.2V) 10,000mAh: this will deliver ABOUT 10 miles of range or less. http://bit.ly/Bike_Battery
Freewheel Cog: http://amzn.to/2qQR0ys
Seatpost Suspension: http://bit.ly/Seatpost

Nuts/screws/belts/pulley needed:
HTD5 12T pulley (with 8mm bore for motor shaft): http://www.ebay.com/itm/12-Teeth-6mm-Bore-setscrew-Timing-Pulley-HTD5M-15mm-Belt-step-motor-Aluminum-/182419904473?hash=item2a7912d7d9:g:uJgAAOSw-0xYeB3N
(Will need to bore out hole from 6mm to 8mm)
HTD5 800x15mm belt: http://bit.ly/bike_BELT
Bearings: http://bit.ly/bearings_bike

We can get these from a hardware store, otherwise you’re getting sets of 30pcs off Amazon
5pcs m4x30mm bolts (clamp motor mount to frame)
4pcs m4x10mm bolts (attach motor to mount)
1pcs m4x50mm bolt (roller bearings seat on this bolt)
5pcs m4 nyloc nuts
3pcs m3x10mm bolts (assembly of electronics case)
5mm wide cable ties (attach pulley to spokes)
_________________________________________________________________

The following should be purchased after looking at the electronics in person
EC5 battery connectors
4mm bullet connectors (for ESC)
_________________________________________________________________

CONSIDER SUBSCRIBING ► http://bit.ly/Subscribe_Corridor_Crew
Watch Season 2 from Beginning ► https://www.youtube.com/watch?v=GJJ5S9Gzazc&list=PLwVUbPpIRn1TwLZJ6JMPJZiAYKT7pE_cH&index=2&t=0s

This Episode ► Wren uses a Tesla battery to build an electric bike so his wife can ride with him.

THE GEAR WE USE ►
Most Used Equipment: http://bit.ly/Corridor_Crew_Gear
Perfect Camera: https://bhpho.to/2FJpQmR
Puget Systems Computers: http://bit.ly/PC_Puget_Workstations

SUPPORT US ►
Translate & Subtitle: http://bit.ly/Make_SUBTITLES
Patreon Donation: http://bit.ly/_Corridor_Patreon_Support
Buy Merch: http://bit.ly/Corridor_Store

FOLLOW US ►
Instagram: http://bit.ly/_Corridor_Instagram
Sub-Reddit: http://bit.ly/_Corridor_Sub-Reddit
Subscribe to our Gaming Channel, NODE: http://bit.ly/Subscribe_to_NODE

MUSIC BY ►
Ginger Runner "Carpet Ride"
Prince Mathicks "my name"
JHFLY "we blessed"
FILM RIOT "Cinema Pack" & "Horror Pack" https://goo.gl/ZulxSK

Видео Building a Tesla ELECTRIC BIKE For my WIFE канала Corridor Crew