Playing Tight Music? - Marble Machine X #115
How tight music can the Marble Machine X actually play?
Thats a question i been asking myself everyday during this project and today we are getting a bit closer to an answer.
We have built in a lot of calibration possibilities in the design of the MMX and the goal with this video is to show you how we can calibrate the timing in several ways.
Next up is bass guitar and funnels, when all the funnels are connected the machine is almost completed in its basic design There will be a lot of small things that needs to be added here and there before we can move on to the final stage which is audio. In this video you are hearing the machine sounding through a variety of non intended recorded methods, most often played through my speakers and then into the wireless mic sitting on me and things are booming a lot in my ill sounding stone room. We are doing a total overhaul acoustic treatment of my studio this spring together with https://www.id-acoustique.com which will deal with this in a wonderful way.
Thanks for following the build and good luck with everything you are doing! // Martin
HBS stud welding for the MMX:
► https://www.youtube.com/watch?v=hlF3Qf19R7k
Engineers & designers working on the HBS project:
►Sebastiaan Jansen | Leuven, Belgium (BE)
https://www.sebastiaanjansen.be
https://www.instagram.com/ikbensebastiaan/
►Marius Hirn | Munich, Germany
https://www.twitch.tv/kitingmare
Polyend Percussion Strikers:
► https://www.youtube.com/watch?v=vQpPVKyISHI
Support the Marble Machine X Project:
► http://www.patreon.com/wintergatan
► https://teespring.com/stores/wintergatan
► https://www.youtube.com/wintergatan2000/join
#marble #machine #4K
———————————
MUSIC DOWNLOADS ► https://wintergatan.bandcamp.com
WINTERGATAN RECORDS ► http://www.wintergatan.net/#/shop
SPOTIFY ► http://bit.ly/2oKxXWd
ITUNES ► http://apple.co/2ntWNsZ
MERCH ► https://teespring.com/stores/wintergatan
————————————
SUBSCRIBE ► https://www.youtube.com/user/wintergatan
INSTAGRAM ► https://www.instagram.com/wintergatan2000
REDDIT ► https://www.reddit.com/r/MarbleMachineX/
DISCORD ► https://discord.gg/QdNwA5Y
————————————
Thanks to the Marble Machine X Team 2019
►Alex Füßl | Alex CNC | Munich, Germany
https://www.youtube.com/alexcnc
https://www.youtube.com/AlexCNCen
►Carlos Montoro | Anjuda Guitars | Madrid, Spain
https://www.youtube.com/channel/UCR9WjwIHOGJXHeGFcq_t1Ow
►Chris Nadon | Aix-en-Provence France
►Dwayne Myers | Safety | Phoenixville, PA, USA
►Ecco Pierce | All Things Ecco | Oakland, California, USA
https://www.allthingsecco.com
►Florian Hu | fhuable | Wellington, NZ
https://www.youtube.com/user/fhuable
►Jacob LaRocca | Rocket Props | Somerville, Massachusetts
https://www.rocket-props.com
►James Passmore | CAD9 Design LLC | Worcester MA
https://cad9.design/
https://www.youtube.com/channel/UCygye7ehM60WZGU5Af4Y4IA
►Marius Hirn | Munich, Germany
https://www.twitch.tv/kitingmare
►Nick Householder | Florida, USA
https://www.youtube.com/c/NickHouseholder
►Philip Brown (solo banjo) Winston Salem, NC USA
https://www.wakeforestinnovations.com/experts/philip-brown-phd/Rainfall projects
https://www.youtube.com/channel/UCPO4D4-UeeFQceK8XrgwXug
►Richard Southall | String HeArt | Devon, UK
https://www.Stringheart.co.uk
►Tim Keller | Inventopia | Davis California USA
https://www.inventopia.org
►Tim Mitchell | CNC Machinist | Nashville USA
►Tobias Gutmann | Tobias Gutmann Prototyping | Munich, Germany
http://www.tobias-gutmann.de
https://www.youtube.com/watch?v=Wgk2fL9byV4
►Tommaso D'Amico | Vancouver, Canada
https://www.linkedin.com/in/tommaso-d-amico
►Will Francis | Machine Thinking | San Francisco Bay Area, USA
https://www.youtube.com/channel/UCfsznjef2zGJnrCRQBXqo6Q
►Grant Lansdell: Great Idea Provider
————————————
MORE ALLIES:
►Viktor Stenberg, Calle Guldstrand, Gustaf Törner | ProtoCut
►Liam Ward
►David Lewis
►Tobias Smidebrant
►Erik Holke
►CNC Routerparts
►Nathan Skalsky
►Karin & Olof Eneroth
►Matterhackers - https://www.matterhackers.com/
►BCN3D
►This Old Tony - https://www.youtube.com/user/featony
►Thomas Pilot - https://www.youtube.com/channel/UCJpCQcfOPQghHGcfecxEEVA
►Roys Sheds Perth Australia
►Supermagnete.de - https://www.supermagnete.de/
Help us caption & translate this video!
https://amara.org/v/C2aTv/
Видео Playing Tight Music? - Marble Machine X #115 канала Wintergatan
Thats a question i been asking myself everyday during this project and today we are getting a bit closer to an answer.
We have built in a lot of calibration possibilities in the design of the MMX and the goal with this video is to show you how we can calibrate the timing in several ways.
Next up is bass guitar and funnels, when all the funnels are connected the machine is almost completed in its basic design There will be a lot of small things that needs to be added here and there before we can move on to the final stage which is audio. In this video you are hearing the machine sounding through a variety of non intended recorded methods, most often played through my speakers and then into the wireless mic sitting on me and things are booming a lot in my ill sounding stone room. We are doing a total overhaul acoustic treatment of my studio this spring together with https://www.id-acoustique.com which will deal with this in a wonderful way.
Thanks for following the build and good luck with everything you are doing! // Martin
HBS stud welding for the MMX:
► https://www.youtube.com/watch?v=hlF3Qf19R7k
Engineers & designers working on the HBS project:
►Sebastiaan Jansen | Leuven, Belgium (BE)
https://www.sebastiaanjansen.be
https://www.instagram.com/ikbensebastiaan/
►Marius Hirn | Munich, Germany
https://www.twitch.tv/kitingmare
Polyend Percussion Strikers:
► https://www.youtube.com/watch?v=vQpPVKyISHI
Support the Marble Machine X Project:
► http://www.patreon.com/wintergatan
► https://teespring.com/stores/wintergatan
► https://www.youtube.com/wintergatan2000/join
#marble #machine #4K
———————————
MUSIC DOWNLOADS ► https://wintergatan.bandcamp.com
WINTERGATAN RECORDS ► http://www.wintergatan.net/#/shop
SPOTIFY ► http://bit.ly/2oKxXWd
ITUNES ► http://apple.co/2ntWNsZ
MERCH ► https://teespring.com/stores/wintergatan
————————————
SUBSCRIBE ► https://www.youtube.com/user/wintergatan
INSTAGRAM ► https://www.instagram.com/wintergatan2000
REDDIT ► https://www.reddit.com/r/MarbleMachineX/
DISCORD ► https://discord.gg/QdNwA5Y
————————————
Thanks to the Marble Machine X Team 2019
►Alex Füßl | Alex CNC | Munich, Germany
https://www.youtube.com/alexcnc
https://www.youtube.com/AlexCNCen
►Carlos Montoro | Anjuda Guitars | Madrid, Spain
https://www.youtube.com/channel/UCR9WjwIHOGJXHeGFcq_t1Ow
►Chris Nadon | Aix-en-Provence France
►Dwayne Myers | Safety | Phoenixville, PA, USA
►Ecco Pierce | All Things Ecco | Oakland, California, USA
https://www.allthingsecco.com
►Florian Hu | fhuable | Wellington, NZ
https://www.youtube.com/user/fhuable
►Jacob LaRocca | Rocket Props | Somerville, Massachusetts
https://www.rocket-props.com
►James Passmore | CAD9 Design LLC | Worcester MA
https://cad9.design/
https://www.youtube.com/channel/UCygye7ehM60WZGU5Af4Y4IA
►Marius Hirn | Munich, Germany
https://www.twitch.tv/kitingmare
►Nick Householder | Florida, USA
https://www.youtube.com/c/NickHouseholder
►Philip Brown (solo banjo) Winston Salem, NC USA
https://www.wakeforestinnovations.com/experts/philip-brown-phd/Rainfall projects
https://www.youtube.com/channel/UCPO4D4-UeeFQceK8XrgwXug
►Richard Southall | String HeArt | Devon, UK
https://www.Stringheart.co.uk
►Tim Keller | Inventopia | Davis California USA
https://www.inventopia.org
►Tim Mitchell | CNC Machinist | Nashville USA
►Tobias Gutmann | Tobias Gutmann Prototyping | Munich, Germany
http://www.tobias-gutmann.de
https://www.youtube.com/watch?v=Wgk2fL9byV4
►Tommaso D'Amico | Vancouver, Canada
https://www.linkedin.com/in/tommaso-d-amico
►Will Francis | Machine Thinking | San Francisco Bay Area, USA
https://www.youtube.com/channel/UCfsznjef2zGJnrCRQBXqo6Q
►Grant Lansdell: Great Idea Provider
————————————
MORE ALLIES:
►Viktor Stenberg, Calle Guldstrand, Gustaf Törner | ProtoCut
►Liam Ward
►David Lewis
►Tobias Smidebrant
►Erik Holke
►CNC Routerparts
►Nathan Skalsky
►Karin & Olof Eneroth
►Matterhackers - https://www.matterhackers.com/
►BCN3D
►This Old Tony - https://www.youtube.com/user/featony
►Thomas Pilot - https://www.youtube.com/channel/UCJpCQcfOPQghHGcfecxEEVA
►Roys Sheds Perth Australia
►Supermagnete.de - https://www.supermagnete.de/
Help us caption & translate this video!
https://amara.org/v/C2aTv/
Видео Playing Tight Music? - Marble Machine X #115 канала Wintergatan
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Wintergatan - Marble Machine (music instrument using 2000 marbles)Cyber Bass with Rubber Wheels! - Marble Machine X #137The Revenge: Timo Boll vs. KUKA RobotСамые необычные музыкальные инструменты мира!BIG MOTORIZED MARBLE RUN MACHINEAmazing Science Toys/Gadgets 1Wintergatan - Marble Machine in Minecraft28 Audio Channels in One Cable! - Marble Machine X #133Theremin (An instrument you play by not touching it)Vibraphone Funnels CompletedCYMATICS: Science Vs. Music - Nigel StanfordWintergatan - Proof of Concept (Music Only)Marble Conveyor Belt Completed! - Marble Machine X #78Top 10 Amazing Music Instruments at Speelklok MuseumAtom-powered Intel Industrial Controller in Concert playing Pipe DreamDomtoren Clock Tower Plays the Marble Machine SongMarble Demagnetizer 2.0 and More! - Marble Machine X #131Wintergatan LIVE At Victoriateatern - FULL CONCERTCustom Bass CYBER CAPOSPlaying 30000 Marbles - Marble Machine X #148