Pressure Washer Plumbing To An IBC Tote
Here’s how I plumbed my Honda pressure Pro 8 GPM to an IBC tote. I used mostly schedule 80 parts for the durability. Plumbing is 2 in to 1.5 in tubing. Most of these pieces are from my local hardware store. You may have to check Amazon for a few pieces. Use some good thread seal to prevent air from entering your water lines. Hope this helps everyone. Hit the subscribe and thumbs up!
http://expertpowerwash.com
http://facebook.com/expertpowerwash
Видео Pressure Washer Plumbing To An IBC Tote канала Expert Power Wash
http://expertpowerwash.com
http://facebook.com/expertpowerwash
Видео Pressure Washer Plumbing To An IBC Tote канала Expert Power Wash
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Inexpensive water tank setup with pressure washerPlumbing on mobile Detailing SetupDIY IBC Tote Conversion to Garden Hose Attachment | Off-Grid Rainwater HarvestingPressure washer plumbingPressure washer trailer build part 4 (FINALLY DONE!!!)Converting IBC tote thread to garden hoseHow to set up plumbing for a buffer or supply tankHow to improve water flow into power washer pumpHow To Plumb A Pressure Washer Rig | Truck Or TrailerPressure washer trailer follow up 2 months of useHow many gpm can you get out of an IBC tote for a pressure washer?Plumbing an IBC tote for power washer with PVCHow to get your SIMPSON Pressure washer to Gravity feed from Tank or IBC TOTEMobile detailing water tank setup | more in depth videoPressure washer trailer build part 3.hose reel and plumbing setupHow to get water to a Pressure Washer from a water tank (mobile washing set up)275 gal IBC tote Garden hose Connector (2 Option)Expert Power Wash 6x10 Pressure Washing Trailer Set UpHow to install a bulkhead fitting on a pressure washing water tankProportioner DIY BUILD: here’s what you need to know