Rebuilding the front of an RV Part 4

Rebuilding the front of an RV - Part 4

Don't forget to subscribe - www.youtube.com/thegimpycamper/?sub_confirmation=1

Contents of video
00:00 Intro
00:43 Pulling Fiberglass Off
01:10 Remove Substrate
01:45 New Plywood
02:05 Plywood Problems
04:17 Rebuilding the top of the camper
08:30 Fixing bottom overlap

This video in our project series focuses on rebuilding the entire front of a 2006 Jayco Jayfeather 29Y. I'm no professional, just an average person who prefers to try to DIY! The whole problem with this, was I was just wanting to glue the fiberglass back down, but it almost literally fell off when I went to take the trim off! I tried to build it stronger than it rolled off the factory. I think that I succeeded in that. Stick around to watch the next couple of videos in the series...

Recommended West Marine Epoxy with Slow Hardener.

Check out the first video in the series which was more about taking the trim off an preparing to fix the delamination and a soft spot in the RV Roof https://youtu.be/2GknjeAo8oY

Check out the second video in the series that focuses on how I chose to fix a soft spot in the roof https://youtu.be/-KElkiOkCJ0

This video is added to the series and covers how to patch a medium sized hole in the roof, the example is where we removed the TV Antenna from the RV https://youtu.be/PEtA_b2SCG4

The third video in the series focused on fixing a bit of delimitation on the side wall. https://youtu.be/cGqhDt35gms

Don't forget to check out our Facebook Page! https://www.facebook.com/gimpycamper/?modal=admin_todo_tour

We are also on instagram www.instagram.com/thegimpycamper

Видео Rebuilding the front of an RV Part 4 канала Gimpy Camper