DREMEL VersaFlame Soldering Lamp

DREMEL VersaFlame Soldering Lamp Dremel has always been and remains a developer and producer of top quality multifunctional electric tools. Its history has started in 1932 when its founder Albert J. Dremel, American inventor and industrialist, had invented his first multifunctional electric tool Dremel supplies its universal tools used in many different spheres of activity or hobbies. DREMEL VersaFlame is a soldering lamp enabling use of direct flame with a catalytic agent and soldering bit. It is the most universal fixed soldering lamp for the moment. It is particular useful in your home workshop. The tool is used for soldering, shrinking, welding, painting removal. The soldering lamp runs on liquid butane. It is characterized by quick heating and recharging. You may use any appropriate gas cylinder to charge the soldering lamp, e.g. gas cylinder for lighters . Insert a gas cylinder into the appropriate nozzle at the rear of the soldering lamp for several seconds and the lamp will be ready for operation. Vessel volume is 22 g. Full vessel increases operating period up to 75 min under maximum load conditions. The soldering lamp has safety mechanism preventing switching of the tool by children. Remove safety lock and press timer to switch on the tool. Control lever increases or decreases temperature and length of a flame jet. Lock push button enables long term use of the switched on tool. Removable support enables stationary operation of the tool. DREMEL VersaFlame achieves the required temperature equal to 1 200 °C immediately after the ignition of the soldering lamp. The activator warms air up to 680°C. It is used to melt plastic and other heat sensitive materials. It also provides effective fusion of heat-sensitive electric cable isolation. Screw soldering bit to activator and fix it with a lock. Now you solder different electronic component in circuit plates with your soldering lamp. Soldering temperature is 550°C. You may also use other optional DREMEL soldering bits. The bit provides air heating up to 1 000°C approximately. Fix the bit on the tool. Now you can heat sufficiently large surfaces, e,g. to remove painting. The reflector is installed into the soldering bit to bow preheated material easily. The tool is stored and transported in a metallic case. High quality DREMEL VersaFlame soldering lamp is used to execute various soldering works and material ...

Видео DREMEL VersaFlame Soldering Lamp канала ChipDipvideo