Fusion 360 Manifold Tutorial (24 Tips Beginners Should Know)

Fusion 360 Beginner Tutorial - Building a Manifold From Scratch Plus 24 tips That Every Beginner Should Learn.

Creating models like the manifold requires good sketching habits like dimensions and constraints. Then to build the solids with extrudes, revolves, patterns, and mirrors when applicable. Finally the finishing touches with cuts, fillets, chambers.

Beginner Fusion Videos- https://www.youtube.com/playlist?list=PLaMhQg4zPYTsCKTzotUodRU8ZS9x00fqv

*Error in video at 13:40 and 18:12 - Pattern should be to the right of extrude. Shows correct later. Missing revolve cut at 18:12 - Watch How To Do This Here... https://youtu.be/TFyc2VHloFA

Show Notes
:36 Strategies For This Model
1:33 First Sketch
1:38 Units Tip
2:07 Tangent Arc Tip
2:13 Ultimate Search Tool
2:19 Offset Sketch
2:42 Trimming
3:03 Sketch Setting for Scaling
3:40 Smart Dimension
3:48 Drag Entities When Not Sure What Dimension Is Missing
4:53 Revolving A Sketch
5:05 Multiple Profiles
6:04 Toggle Visibility
6:22 Slice
7:09 Projection
9:01 Tangency in sketching
9:14 Sketch Mirror
9:32 Extrude Shortcut
10:48 Concentric Relationship
11:45 When To Use Through All Cut
12:50 Circular Pattern - Using Features
13:25 Pattern Axis
13:40 Pattern - ***Mistake here*** Pattern should be to the right
16:34 Angled Dimensions
16:41 3 Point Rectangle
18:18 Missing Revolve Cut - ***Mistake here*** Should use first sketch to cut out interior features
Be sure to check out my other Fusion 360 tutorials!
https://www.youtube.com/playlist?list...

Love your feedback and comments!!
SUBSCRIBE!

LET'S CONNECT:
linkedin https://www.linkedin.com/in/mrtylerbeck
Twitter https://twitter.com/mrtylerbeck

What Fusion 360 tutorials would you like to see? What beginner content for Fusion 360 would be most helpful?

Видео Fusion 360 Manifold Tutorial (24 Tips Beginners Should Know) канала Tyler Beck of Tech & Espresso