How To, Harley Road King Rear Brake Pad Install.

How To, Harley Road King Rear Brake Pad Install. This is how to install new pads on Harley Touring bikes with solid rear calipers and floating rotors. 2000 - 2007 models this will work on. Much easier than you would think, by using thin pin to align brake pads. This method will help a lot. Seeing it in action helps make it a lot clearer.

If you have any Questions just ask.

Step 1 Remove master top cover, Compressed the caliper pistons fully so the pads have room to remove and install.

Step 2 Align the pad on the rotor using the rivets as I show. It's the same alignment for both the inner and outer pad.

Step 3 Hold the pad in place and rotate the rotor toward the front of the bike. Use thin pin to start with to align brake pads, Then use stock pins to finish. You will find this little trick will help a lot.

Видео How To, Harley Road King Rear Brake Pad Install. канала Two Wheel Rocco