Makita 481 vs Makita 486 | Is there a difference?

Makita DHP/DDF 481 Specifications

Chuck Capacity: 1.5 - 13 mm
Blows per Minute (Hi) - ipm: 0 - 31,500 ipm
Blows per Minute (Lo) - ipm: 0 - 8,250 ipm
No Load Speed (Hi): 0 - 2100 rpm
No Load Speed (Lo): 0 - 550 rpm
Voltage: 18 v
Max. in wood: 76 mm
Max. in masonry: 16 mm
Max. in steel: 13 mm
Torque Settings: 21 + drill
Vibration K factor: 1.5 m/sec²
Maximum Output: 640 w
Lock Torque: 125 Nm
Max. Fastening Torque (Soft Joint): 60 Nm
Max. Fastening Torque (Hard Joint): 115 Nm
Vibration: Impact drilling into concrete: 6.5 m/sec²
Vibration: Drilling into metal: 2.5 m/sec²
Weight (with batteries): 2.7 kg

Makita DHP/DDF 486 Specifications

Chuck Capacity: 1.5 - 13 mm
No Load Speed (Hi): 0 - 2,100 rpm
No Load Speed (Lo): 0 - 550 rpm
Blows per Minute (Hi) - ipm: 0 - 31,500 ipm
Blows per Minute (Lo) - ipm: 0 - 8,250 ipm
Voltage: 18 v
Max. in wood: 76 mm
Max. in masonry: 16 mm
Max. in steel: 13 mm
Torque Settings: 21 + Drill
Vibration K factor: 1.5 m/sec²
Noise sound pressure: 84 dB(A)
Noise sound power: 95 dB(A)
Noise K factor: 3 dB(A)
Net weight: 2.3 – 2.7 kg
Max. Fastening Torque (Soft Joint): 65 Nm
Max. Fastening Torque (Hard Joint): 130 Nm
Vibration: Impact drilling into concrete: 8.0 m/sec²
Vibration: Drilling into metal: 2.5 m/sec²

Hi! On this channel we share with you, tests performed on different tools with which we have worked. If you like tools and want to see how different tools behave before buying them, stay close to this channel. So if you like this topic, we already consider you a subscriber!

Contact ➜ See the "About" section of the channel

Видео Makita 481 vs Makita 486 | Is there a difference? канала Tool Test