Fluke 1507 Motor Insulation and low ohm Testing
May 2020:
Hi,
I feel my channel is going off topic and I want to keep doing what I love the most (electronics), but to make new and better videos I need to get some new gear for my private electronics lab. This will cost me some money so I would be very grateful for everey donation I can get so I can keep posting new Electronics videos!
Thank you!
If you want to donate click this link:
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=NN8HEKWR2MNAY&item_name=Upgrade+quality+of+my+content¤cy_code=NOK&source=url
Testing the insulation Megging and Low Ohm testing windings on a old three phase Siemens electric motor Fluke 1507 Insulation Tester aka, Megger.
This Motor got too low readings on the insulation test and need to be refurbished.
The readings should be at min. 1G ohm, but a good motor reads 5G ohms plus. And the readings should be more constant and not climb in value this slow ( as shown on my video).
And note, the one minute test and ten minute test should be subtracted and NOT divided!! :)
Please Like, Comment and Subscribe to my channel :)
Видео Fluke 1507 Motor Insulation and low ohm Testing канала LUNORTEK
Hi,
I feel my channel is going off topic and I want to keep doing what I love the most (electronics), but to make new and better videos I need to get some new gear for my private electronics lab. This will cost me some money so I would be very grateful for everey donation I can get so I can keep posting new Electronics videos!
Thank you!
If you want to donate click this link:
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=NN8HEKWR2MNAY&item_name=Upgrade+quality+of+my+content¤cy_code=NOK&source=url
Testing the insulation Megging and Low Ohm testing windings on a old three phase Siemens electric motor Fluke 1507 Insulation Tester aka, Megger.
This Motor got too low readings on the insulation test and need to be refurbished.
The readings should be at min. 1G ohm, but a good motor reads 5G ohms plus. And the readings should be more constant and not climb in value this slow ( as shown on my video).
And note, the one minute test and ten minute test should be subtracted and NOT divided!! :)
Please Like, Comment and Subscribe to my channel :)
Видео Fluke 1507 Motor Insulation and low ohm Testing канала LUNORTEK
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tutorial: Insulation Resistance Testing / Megger Testing / PAT testing Pt 1Checking Windings in a 9 Lead 3 Phase Motorहिंदी में|Digital megger से मोटर की जांच करें |How to test motor winding| insulation test on digitalInsulation Resistance Testing on a 3 Phase MotorHow to Test Wire Using a MegohmeterHow To Test a Motor with the Fluke 1587 FCMegohmmeters (Full Lecture)How to troubleshoot 3 phase 240 or 480 volts any motor 3 leads 6 leads or 9 leads3 phase motor testUnderstanding STAR-DELTA Starter !"Megger" insulation test on a bad motorHow to Meg Ohm a Motor - SmartHVAC102( Pt. 2 ) Testing Non Insulated Tools at 1000VDC Using My FLUKE 1587 FC Insulation TesterHow to Operate a Fluke 1507 Insulation Resistance Tester to Run PI and DAR TestEpisode 88 Fluke 1587 Brief ReviewStar Delta Starter Explained - Working PrincipleHow to Check the Winding Resistance on a 230/460 Volt, 3 phase, 60 Hz, 9 lead motor#FLUKE - El megometro de Fluke 1507 - Caracteristicas y como utilizarlo en nustro trabajo. 2º PARTET4D #81 - Insulation testing...what's it all about!?Cheap Amazon Megohmmeter VS Supco M500 Review