OpenTX 2.2 - Flashing OpenTX and Bootloader to TaranisQ X7
Forget Zadig - OpenTx adopted much easier methods to flash firmware and the bootloader in 2.1. I'm using a TaranisQ X7 for this demonstration - and the TaranisQ X7 requires OpenTX 2.2 or later.
Видео OpenTX 2.2 - Flashing OpenTX and Bootloader to TaranisQ X7 канала R. Scott Page
Видео OpenTX 2.2 - Flashing OpenTX and Bootloader to TaranisQ X7 канала R. Scott Page
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
OpenTX 2.0 and Beyond Episode 2 - Change Your Thinking
(10/12) FrSky TARANIS Radio – Setting up and using the Trainer (Master/Slave) setup with a DX7
OpenTX 2.2 - SD card Error
OpenTX 2.0 and Beyond - Episode 3 - Examining the Throttle Mix
Taranis Q X7 Setup & Review | Flite Test
How to play FPV Freerider on PC using Taranis Q X7S radio (USB cable)
FrSky Taranis / OpenTx Crumbs - Variometer - basic setup
Taranis Tips: Using Telemetry in OpenTX2.1
Flashing your reciever with the Taranis QX7
FrSky Taranis X-Lite Firmware Upgrade and LUA Scripts
Flysky TH9X Programming and Mixing
OpenTX for Beginners - Sticks and Mixer
MAR OpenTX Quick Tip: Throttle Curves
iRangeX iRX6 Multiprotocol Module Review 👍
How to flash EU / NON EU International firmware on your FrSky X4R
Taranis Q X7 v Taranis X9D
Taranas X7 - First 4 things to do with your new radio
Ideas for your programmable radio (Taranis, OpenTX, etc...)
OpenTX 2.0 and Beyond - Episode 5 - Upgrading a Taranis to OpenTX 2.0
OpenTX 2.1 Quick Tip: Using subtrim and endpoints with flight controllers (naze32/APM/flip32 etc)