How to use: New Red light remote control Duplicator Key Fob copy CAME Top 432NA

Product From: https://www.aliexpress.com/store/product/QIACHIP-433MHz-Remote-Control-Duplicator-Cloning-Copying-Transmitter-Garage-Door-Opener-Light-Switch-Key-Fob/1456073_32842236444.html?spm=2114.12010608.0.0.6126804cCpcVLw

How to use(How to Program) :

Step 1 – delete the existing code of our remote duplicator

Press and Hold “A” and “B” buttons together - Led will flash

Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted !

Step 2 - clone your original remote

1) Put both remotes into "back to back" position. Make sure they have direct contact.
Or the two remote controls should be placed as closely as possible (put the two remote controls on the desktop side by side with zero distance)
2) Press and hold one button on your original remote and one button on your clone remote.
Keep holding until LED blinks.

If for some reason the clone does not go further then blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.

For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.

Видео How to use: New Red light remote control Duplicator Key Fob copy CAME Top 432NA канала qiachip.com