Making my PSU cables literally 20 times better (0.6 to 0.03ohms)
My old bench PSU cables had a resistance of about 0.6 ohms between the cable resistance and the original banana plugs. That might not sound much, but at high current and low voltage it makes a difference, and that's especially obvious when testing LED torches or flashlights with the PSU in place of the battery to get an indication of current.
I decided to make a set of new cables with better connectors and cable, but couldn't decide between 1mm vs 2.5mm CSA (roughly 17 to 13 AWG). In the end the decision was made by the discovery that the silicone rubber 2.5mm cable wasn't what it seemed!
With the new banana plugs and cable the resistance of the leads and connections has dropped to 0.03 ohms, which is much more acceptable.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:-
http://www.bigclive.com/coffee.htm
This also keeps the channel independent of YouTube's advertising algorithms allowing it to be a bit more dangerous and naughty.
Видео Making my PSU cables literally 20 times better (0.6 to 0.03ohms) канала bigclivedotcom
I decided to make a set of new cables with better connectors and cable, but couldn't decide between 1mm vs 2.5mm CSA (roughly 17 to 13 AWG). In the end the decision was made by the discovery that the silicone rubber 2.5mm cable wasn't what it seemed!
With the new banana plugs and cable the resistance of the leads and connections has dropped to 0.03 ohms, which is much more acceptable.
If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:-
http://www.bigclive.com/coffee.htm
This also keeps the channel independent of YouTube's advertising algorithms allowing it to be a bit more dangerous and naughty.
Видео Making my PSU cables literally 20 times better (0.6 to 0.03ohms) канала bigclivedotcom
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Modifying an old light with LED tape.Building a portable power station (1200w, USB-C and MORE!)Crimping tool test that I screwed up. (Read description.)Test of the Yihua 502D USB bench power supply. (With fix!)Shorting out a fully charged cheap lithium jump starter. (It didn't end well.)A simple guide to electronic components.How does a USB keyboard work?Perhaps the weakest link in the US electrical system500V to 12V 3A power supply (with schematic)Automatic generator changeover switch (with schematic).Cheapest way to learn to solderSide-glow fibre optic is still terribleTeardown of an IKEA Koppla USB power supply.Popping a 5000A FuseWill Tesla's tabless cells ever use Schoopage?Random stuff on my bench.New LED lamp twist reverse engineered from a pictureThings you should know about fuses. (including a 15kV one)Using LEDs as mains indicator lights on 120V and 230V (live demos)Inside a Rentokil / Victor electronic mousetrap.