How to Hone and Polish Marble, Limestone, Travertine, etc. from a Bane-Clene on-hand training class.

Video shows how to remove scratches and dull areas from Marble and other soft stones and bring the surface to a high polish shine.
Video includes an overview from StoneTech™, but most of the video is from an actual hands-on training stone care class conducted at the Bane-Clene Indianapolis training center.
Use StoneTech Non-Acidic Honing Powder to remove scratches, acid etching, wear patterns on soft stones such as marble, limestone, travertine, terrazzo.
-----------------------------------------------------
FEATURES and BENEFITS of StoneTech Honing Powders::
• Removes Scratches.
• Removes Acid Etching.
• Acid-free (No oxalic acid that will eventually pit stone).
• Safe to Use.
• Easy Application.
• Develops Honed Surface.
• Cleans and Hones.
• Honing Powder comes in 5 abrasive grits for a variety of honed finishes on soft stones like marble and limestone - from deeply honed to satin. StoneTech Honing Powder is for honing marble, limestone, travertine and terrazzo.
• Honing Powder Coverage: Depending on the type of stone, surface texture, and level of hone desired, coverage is approximately 800 - 1,200 sq. ft. per jar.
• Typical Honing Charge: At least $1.00 per square foot for each hone.
-----------------------------------------------------
PROCEDURE to Hone and Polish Travertine, Terrazzo, Marble and Limestone Floors (2:12):
1. The lower the grit number, the more aggressive the hone, just like with sandpaper.
2. Test in an inconspicuous area to determine the ease of application and desired results. (2:21)
3. Make sure surface is clean, dry and free of waxes and coatings. (2:36)
4. If surface is heavily soiled, pre-clean with StoneTech Klenz-All™. (2:42)
5. Mask off baseboards, carpet, etc., with protective plastic and/or blue painter’s tape. (2:50)
6. If you are using a variety of abrasive grits, ensure that the surface is well rinsed and a new Gorilla Hogs Hair Natural Pad is used for each changeover.
7. Apply about 1/2 cup Honing Powder plus 1 cup clean water to stone surface. (3:07)
8. Refinish using a hand orbital sander or weighted heavy-duty 175 rpm floor machine at 130 to 140 lbs., 175 rpm, fitted with a pad driver and a Gorilla natural hair pad. (3:13)
9. Keep compound wet while buffing with plenty of water. Add Honing Powder as needed. (3:21)
10. Buff area until desired level of hone is achieved. (3:26)
11. Rinse well and use a wet vacuum or hot water extraction unit to remove all excess compound. (3:35)
12. Clean equipment with water. (3:40)
13. Use successively higher grits of Honing Powder to close the face of the stone and follow with StoneTech Polishing Powder as applicable.
14. NOTE: THIS PROCESS SHOULD ONLY BE USED BY EXPERIENCED, TRAINED TECHNICIANS. We STRONGLY suggest attending a hands-on training class at the Bane-Clene Indianapolis training center. We suggest you watch the YouTube video and even purchase the Training DVD’s.
15. Proper care of honed and polished stone such as marble: To maintain the stone’s natural beauty, seal the surface with Sta-Clene®, StoneTech Stone Sealer, Impregnator Pro™ or Bullet Proof™. For maintenance cleaning, use StoneTech Revitalizer™ or All Purpose Stone & Tile Cleaner. (3:52)
16. Hands-On class demonstrating procedure. (4:10)
16. More detailed information in available from Bane-Clene is in its "Stone, Tile & Grout - Cleaning, Restoration & Protection" Set of Two Training "How-To" DVDs containing over 3 hours of stone care training information.
-----------------------------------------------------
• More information on the StoneTech Klenz-All is at:
https://www.baneclene.com/professionals/Content.aspx?xps=MjA4OA==
• More information on the StoneTech Honing Powders is at:
https://www.baneclene.com/professionals/Content.aspx?xps=MjE5OQ==
• Information on StoneTech™ Polishing Powder is at:
https://www.baneclene.com/professionals/Content.aspx?xps=MjIwMA==
• More information on the "Stone, Tile & Grout - Cleaning, Restoration & Protection" Set of Two Training "How-To" DVDs is at:
https://www.baneclene.com/professionals/Content.aspx?xps=MjI1NA==
------------------------------------------------------
For more information on stone, marble, granite products as well as professional carpet cleaning equipment, call Bane-Clene at:
800-428-9512 or email us at:
bane@baneclene.com or visit our web site at:
https://www.baneclene.com/
-----------------------------------------------------
• INDEX of BANE-CLENE ARTICLES for PROFESSIONAL CARPET CLEANERS:
https://www.baneclene.com/professionals/

• BANE-CLENE PROFESSIONAL SPOTTING GUIDE:
https://www.baneclene.com/ProSpotGuide/

• BANE-CLENE PROFESSIONAL CARPET CLEANING EQUIPMENT GUIDE:
https://www.baneclene.com/ProEquipGuide/

• BANE-CLENE INFORMATION & CATALOG REQUEST:
https://www.baneclene.com/contact/Inqform.aspx
------------------------------------------------------
© Bane-Clene® Corp.
3940 N. Keystone Ave.
Indianapolis, IN 46205
800-428-9512
https://www.baneclene.com
bane@baneclene.com

Видео How to Hone and Polish Marble, Limestone, Travertine, etc. from a Bane-Clene on-hand training class. канала Bane Clene