How to Make a Rubber Mold to Cast Concrete Pavers/Stepping Stones
This video tutorial details the process of making a Poly 75-70 polyurethane rubber mold of a concrete stepping stone. In this example, we utilize the "poured block mold technique", which is considered to be one of the most simple mold making methods.
Although the stepping stones in this scenario can be easily replaced through options at retail stores, this mold making method is great when you have a unique stone that is not replaceable OR when you'd like to produce custom pavers from your original design (made from wood, clay, a printed model, etc.).
A full list of materials and tools used for this project can be found at the end of the video.
The Steps:
1. Select a Model [0:32]
2. Apply a Sealing Agent (Poly PVA Solution) [0:53]
3. Prepare Model and Construct Mold Box [1:24]
4. Apply Release Agent [3:33]
5. Calculate Amount of Rubber Needed for Mold [4:13]
6. Measure, Mix & Pour Mold Rubber [5:03]
7. Demold [6:29]
8. Cast Concrete [7:24]
http://www.polytek.com
http://www.facebook.com/polytekdevelopmentcorp
http://www.twitter.com/PolytekUSA
Видео How to Make a Rubber Mold to Cast Concrete Pavers/Stepping Stones канала Polytek Development Corp.
Although the stepping stones in this scenario can be easily replaced through options at retail stores, this mold making method is great when you have a unique stone that is not replaceable OR when you'd like to produce custom pavers from your original design (made from wood, clay, a printed model, etc.).
A full list of materials and tools used for this project can be found at the end of the video.
The Steps:
1. Select a Model [0:32]
2. Apply a Sealing Agent (Poly PVA Solution) [0:53]
3. Prepare Model and Construct Mold Box [1:24]
4. Apply Release Agent [3:33]
5. Calculate Amount of Rubber Needed for Mold [4:13]
6. Measure, Mix & Pour Mold Rubber [5:03]
7. Demold [6:29]
8. Cast Concrete [7:24]
http://www.polytek.com
http://www.facebook.com/polytekdevelopmentcorp
http://www.twitter.com/PolytekUSA
Видео How to Make a Rubber Mold to Cast Concrete Pavers/Stepping Stones канала Polytek Development Corp.
Показать
Комментарии отсутствуют
Информация о видео
5 октября 2017 г. 0:40:01
00:09:35
Другие видео канала
How to do a Hand Carved Flagstone Concrete Overlay Wall, Outdoor Kitchen, Fireplace, or Seat WallКак сделать форму из силиконаCARA MEMBUAT CETAKAN PAVING BLOCK BATA MANUALHow To Form, Pour, And Stamp A Concrete Patio SlabDIY CONCRETE PLANTER 26" UNDER $7Silicone Mold & Resin Casting : Roman ReliefMake Your Own Silicone Molds - Easy Mold Making (Mould) - For Candle Or Resin MoldsQuickrete Walkmaker How To VideoPouring Air Crete Panels for ShedHOW TO MAKE DECORATIVE GRC MOLDHOW TO MAKE THE BEST MANUAL PAVER BLOCKAmazing Concrete Garden Boxes PART 1- DIY Forms to Pour and Cast Cement Planter link together BedsStone veneer molds rubber - How to make artificial stone - Production videoHow to DIY large, irregular concrete stepping stonesHow to get a Exposed Aggregate Finish on ConcreteCreative Ideas #2 | Stone texture from plastic bag | Mold makingHow to PARGE and SCULPT with Rapid Set Mortar Mix (Part A)How To Make White Concrete | A Modern Builds ExperimentReadymade Concrete Slab Making Process in IndiaMaking a silicone mold FREE 2019