DIY Electric Bike

This is my self built electric bike based on Tom Stantons electric bike video: https://youtu.be/9rIIJbDkpN8

This is a great project and I really enjoyed doing it. With a top speed on 6s of about 24 mph its great fun to ride and gets you around quickly.

I have a few slight changes on my bike such as using as esc instead of a vesc, this reduced the cost of the project to about £300 excluding the batteries. Due to using a esc I had to modify a servo test to enable the twist throttle to communicate with esc and motor. I have made a separate video on how I did this. Here is a link to that: https://youtu.be/cceUTv6tAaA

Here are the main specs:

Fixed gear bike :http://amzn.eu/ahbiktl

Motor: https://hobbyking.com/en_us/turnigy-aerodrive-sk3-6374-149kv-brushless-outrunner-motor.html

3D Printed parts: https://www.thingiverse.com/StantonFrames/designs

Esc: 100A esc with built in 5v bec but can't find a link

Servo Tester: https://www.banggood.com/Servo-Tester-Third-Gear-Switch-With-Indicator-Light-4_2V-To-6_0v-p-1079862.html?rmmds=buy

Twist throttle: http://www.ebay.co.uk/itm/Electric-E-Scooter-Bike-12v-24v-36v-12-24-36-Volt-Twist-Throttle-Grip-Set-Blue/192332804414?hash=item2cc7edb13e:g:0F4AAOSw9GhYiewL

There are more details in Toms video about the bike in a bit more detail. Thanks watching and give this video a like if you enjoyed it and subscribe to see my next project where I attempt to make a sub £100 electric skateboard.

Видео DIY Electric Bike канала Gabriel Robson