Jet JDP-12 Dirll Press features

I purchased this drill press from ToolNut.com Friday April 26 and got it the following Tuesday April 30. I assembled it on Thursday and tested it to make sure everything works. Assembly took about thirty minutes if you're doing this for the first time.

I have used a 3 1/8" forstner bit I have to install larger clocks into wooden fixtures. The under powered Task Force drill press cut very slowly and stopped often as it couldn't handle the bit. The Jet drill press took the bit and bored much faster and only slowed with the effort instead of seizing up. I backed off the pressure I gave the bit and it cut pretty well.

This is the best I can do after four takes.

Видео Jet JDP-12 Dirll Press features канала NoBreyner60