flysky ia6 ppm output with ia6b for the apm2 6

flysky-ia6b to 10 channel firmware mod. If using ia6b you can use ppm for 8 channels with the apm 2.6 and 2.5.2

alex56ma Myasichev for pointing my error..
according to https://github.com/povlhp/iBus2PPM/blob/master/iBus2PPM-instructions.md

the instructions the ppm should only be able to do 6 channels , so I did a huge mistake and assumed the actually readme was correct. Regardless it works with 8 channels maybe even 10. ..but I've only confirmed the 8
So with that if you have a ia6b receiver You don't have to get the 10 channel or the arduino if you are happy with just the 2 dip switches for flight modes and 2 variable dials....
**************
banggood
https://goo.gl/mGLCCr //10ch ia10
https://goo.gl/xMXkr6 //6ch ia6b 8 confirmed with ppm
https://goo.gl/90xIFK // fs-i6 with ia6b
https://goo.gl/aPvNnv //fs-i6 with ia6 .you need to get either ia6b or ia10 separately
https://goo.gl/wFGdsw // get this cable to easy firmware update ........................................your flysky through the port on the back

http://goo.gl/Jf8tnZ arduino nano
**************
Again Thank you

alex56ma Myasichev
His youtube channel
https://www.youtube.com/channel/UCa1VA_EfWWeJy5Ivtioi9yQ
Support
https://www.paypal.me/bangs6996

If I help you in the comments don't ever feel obligated to donate.
all donations will go towards future video's
-
-
-

Видео flysky ia6 ppm output with ia6b for the apm2 6 канала ModItBetter