Homemade 4 Cylinder Carburetor Synchronizer/Manometer
An extended video of my homemade manometer with detailed explanations and demonstrations of it in operation. Very inexpensive yet very accurate. I used Snapple bottles which worked fine, but any glass bottle will do. Do not use plastic bottles; they will flex and crumple. You'll notice my design links all 4 cylinders together to give you true comparison across all 4 relative to each other.
Since it's been asked: if you get air in the reservoir line simply blow/suck on one of the cylinder lines until all air bubbles are gone; just like if a bottle goes dry, etc. You can also *reduce* the vacuum on another cylinder and wait until you pull fluid back in the dry bottle assuming don't pull another bottle dry at the same time.
And for the carburetor adapters, you can make your own (see my comment in the comments section) or buy them here: http://www.z1enterprises.com/ItemDeta...
Here's a list of required materials:
4 Glass bottles
4 Rubber Stoppers
4 plastic 'tees'
20'-25' clear tubing
4 intake port adapters (specific to your bike make/model)
Tip: put the stoppers in the freezer for a while before trying to drill the holes for the tubing and it will drill much cleaner.
Видео Homemade 4 Cylinder Carburetor Synchronizer/Manometer канала kcorbings550
Since it's been asked: if you get air in the reservoir line simply blow/suck on one of the cylinder lines until all air bubbles are gone; just like if a bottle goes dry, etc. You can also *reduce* the vacuum on another cylinder and wait until you pull fluid back in the dry bottle assuming don't pull another bottle dry at the same time.
And for the carburetor adapters, you can make your own (see my comment in the comments section) or buy them here: http://www.z1enterprises.com/ItemDeta...
Here's a list of required materials:
4 Glass bottles
4 Rubber Stoppers
4 plastic 'tees'
20'-25' clear tubing
4 intake port adapters (specific to your bike make/model)
Tip: put the stoppers in the freezer for a while before trying to drill the holes for the tubing and it will drill much cleaner.
Видео Homemade 4 Cylinder Carburetor Synchronizer/Manometer канала kcorbings550
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Carb Syncing: How to Fine Tune Your CarburetorsHomemade Carburetor Synchronizer - Suzuki Bandit 600 [TUTORIAL]Making a 4 Stroke Engine. Episode 4 - Engine Block and Cylinder HeadHow-To: Bench Synch CarbsSynchronize Carburetors - GS550 Cafe Racer Build (Part 102)Синхронизатор жидкостный Yamaha XJ600SVergaser synchronisieren selber machenDeceleration Backfire: Tuning your carburetorBalancing Carburettors with home made manometerDIY Carburetor Synchronize / Balance ToolThe BEST method for cleaning carburetors - soda blast and ultrasonic73 Honda CB750 Custom Build Episode 35 - Carburetor SynchronizationMotorcycle Mikuni CV Carburetor Cleaning for Suzuki, Honda, Yamaha TutorialThe Single Most Common Carburetor Problem (Clogged Pilot Jets) and How To Fix It | MC GARAGEHomemade carburetorHow to sync carburetors throttle bodies the right and WRONG way!How does CV carburetor work animation DIY adjustment screw - ep26 - Roma Custom BikeSuzuki GS1100G Carburettor BalanceThrottle Body SynchronizationHomemade Carb Sync Tool and Mail Call