How to weld a Patch on a Car - Side Markers Delete 240Z

In this video I'm showing how to I removed the side marker holes in the fender of my Datsun 240Z. First I made the shape of the cutout easier by rounding the ends. Then I removed all the paint around the opening for clean welding. I preshaped a piece of sheet metal of the same thickness as the fender to match the curved shape of it. Once I had it I cut it to shape to fit inside the opening. I held the patch in place with the help of a few magnets. Then I slowely startet to weld it in, always made sure it sits fush before welding one spot. To keep the heat to a minimum I always cooled the weld with compressed air. I also followed a cross pattern to weld it in to reduce the heat and warping. Then I snaded the welds down and stretched it with hammer and dolly. To reshape the warped fender with hammer and dolly I sanded the welds down completely flush on both sides. After a rough shaping it was time to apply a guide coat with black matte paint. Then I sanded it with a flexible file that had a 240 grit emery cloth taped to it. I hammered and sanded back and forth until the shape of the fender was absolutely perfect.

I hope you like my work and enjoy the video.

Huge thank you to all of my Patreon supporters and especially to:

Adel AlSaffar
AK
Alfonso Baz
Alistair Moor
Amar.k
Arron Metcalf
Ben Burns
Ben Sigelman
Bike Kefeli
Brenna Redpath
Bryan Knauer
Chris Walter
Dane Prince
Daniel Shaw
David Barker
David Lehnus
Edward Conway
Haitham Al Zir
Harrison Angsten
James
John Shebanow
Joseph Kamps
Josh Ledford
Josh Wasserman
Joshua Bentley
Joshua Scher
Kar
Kerem Yollu
Lambda GPU Workstations
Marcus H.
Mark Tesmer
Mellissa Marcus
Nathaniel Jack
nick arello
NoLoneSurvivor
Pat Thrasher
Peter Cyprian
Peter Riddett
potokslow
Ryan Pickett
Scott Tomlin
Stephen Buggy
StevenVR
Tyler Carruth
VaushVidya
Vickie Bligh
Vince Valenti
Will Black
Yale Baker
Yuri Zapuchlak
Aaron Funk
Adam Holtzclaw
Alipasha Sadri
Andre
Andrew Lavergne
Andrew Phillips
Antal
Arni Bjorgvinsson
Bobcat Johnson
Bonnie Williamson
Brett Pitts
Brian Hoerl
Bruce Bosckek
Caleb Betczynski
Chad Bryant
charader
Christian Fjelldal
Crystal Cash
Damien Fuller-Sutherland
Daniel Trejo
Daniel Varga
Dave Hardware
David Chang-Yen
David P Hruska
David Powell
Dustin Davis
Dylan LikeBobDylan
Erik Nordby
Grant Daniel
Haley McFadden
Hard_Boiled
Jack Curry
Jacob Hamm
James Berwind
Javiera Ignacia Jeldes Pizarro
Jaxon Gray
Jeremy Cole
Johan Vergeer
Joël Franusic
Justin Blackwood
Jörg Thomsen
Ken Rosso
Kevin Rechsteiner
Kurt Gazow
Leon Fox
Marc Cerisier
Mary Casella
Mellissa McConnell
Micah Reid
Michael Lamp
Michael Masouras
Nemo
Peter Read
pk42069
repülő búgás
Robert T McCune
Scott Marshall
Stefan Kronander
Svenja Kuckla
Taylor H
Thanny
Tim Holt
Tom Wallace
Torben Arneberg Jensen
Trevor Kam
Tucker Ifft
William
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, it's not my language. I try my best to improve my technical english.

Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)
„I make a new one“ T-Shirts:
https://teespring.com/stores/my-mechanics

My Main Channel:
https://www.youtube.com/c/mymechanics

My Second Channel:
https://www.youtube.com/c/mymechanicsinsights

My Patreon Page:
https://www.patreon.com/mymechanics

Видео How to weld a Patch on a Car - Side Markers Delete 240Z канала my mechanics insights