How to get started with LinuxCNC - CNC router - 2018
#LinuxCNC #tutorial
This video is a tutorial showing you how you can use LinuxCNC to control a CNC router. It's free software that I use to make parts for RC aeroplanes and drones. I've used the OX CNC router from OpenBuilds supplied as a kit form Ooznest. But it should work with most CNC routers
It's a long video so I've included the section you can jump to
It includes the following:-
1. Why you may want to use LinuxCNC instead of software such as Mach3. Quick clue "It's FREE"
2. CNC router machines you can build or buy
https://youtu.be/F4xHCwtaS3w?t=1m53s
3. Controller board I use with LinuxCNC - the TB6560
https://youtu.be/F4xHCwtaS3w?t=5m48s
4. Downloading LinuxCNC to boot from USB or DVD
https://youtu.be/F4xHCwtaS3w?t=6m45s
5. Running the latency test to determine the value for the stepconf wizard
https://youtu.be/F4xHCwtaS3w?t=9m22s
6. Configuration with the stepconf wizard to work with a TB6560 and 3 axis 4 stepper motor CNC router
https://youtu.be/F4xHCwtaS3w?t=16m8s
7. Testing each Axis to ensure smooth operation
https://youtu.be/F4xHCwtaS3w?t=26m17s
8. Loading G-code made with Fusion 360 for a drone build
https://youtu.be/F4xHCwtaS3w?t=34m40s
G-code is here http://www.rckeith.co.uk/download/tricopter-frame-linuxcnc/
9. Making the first cut - a frame for a Tri-Copter drone
https://youtu.be/F4xHCwtaS3w?t=38m41s
10. The finished frame and conclusion
https://youtu.be/F4xHCwtaS3w?t=42m5s
Post on my website with details and screenshots of stepconf setting
https://www.rckeith.co.uk/free-linuxcnc-openbuilds-ox-router/
https://www.rckeith.co.uk/how-to-choose-steppers-motors-and-controllers-for-diy-cnc-machines/
Spindle Relay Configuration is for Mach3 but the wiring is the same for LinuxCNC. Just set in the Stepconf wizard to use a "Spindle ON" and it works just fine.
https://www.rckeith.co.uk/tb6560-4-axis-spindle-relay-configuration-with-mach3/
Tricopter G-code files
https://www.rckeith.co.uk/download/tricopter-frame-linuxcnc/
Видео How to get started with LinuxCNC - CNC router - 2018 канала Keith Howlette
This video is a tutorial showing you how you can use LinuxCNC to control a CNC router. It's free software that I use to make parts for RC aeroplanes and drones. I've used the OX CNC router from OpenBuilds supplied as a kit form Ooznest. But it should work with most CNC routers
It's a long video so I've included the section you can jump to
It includes the following:-
1. Why you may want to use LinuxCNC instead of software such as Mach3. Quick clue "It's FREE"
2. CNC router machines you can build or buy
https://youtu.be/F4xHCwtaS3w?t=1m53s
3. Controller board I use with LinuxCNC - the TB6560
https://youtu.be/F4xHCwtaS3w?t=5m48s
4. Downloading LinuxCNC to boot from USB or DVD
https://youtu.be/F4xHCwtaS3w?t=6m45s
5. Running the latency test to determine the value for the stepconf wizard
https://youtu.be/F4xHCwtaS3w?t=9m22s
6. Configuration with the stepconf wizard to work with a TB6560 and 3 axis 4 stepper motor CNC router
https://youtu.be/F4xHCwtaS3w?t=16m8s
7. Testing each Axis to ensure smooth operation
https://youtu.be/F4xHCwtaS3w?t=26m17s
8. Loading G-code made with Fusion 360 for a drone build
https://youtu.be/F4xHCwtaS3w?t=34m40s
G-code is here http://www.rckeith.co.uk/download/tricopter-frame-linuxcnc/
9. Making the first cut - a frame for a Tri-Copter drone
https://youtu.be/F4xHCwtaS3w?t=38m41s
10. The finished frame and conclusion
https://youtu.be/F4xHCwtaS3w?t=42m5s
Post on my website with details and screenshots of stepconf setting
https://www.rckeith.co.uk/free-linuxcnc-openbuilds-ox-router/
https://www.rckeith.co.uk/how-to-choose-steppers-motors-and-controllers-for-diy-cnc-machines/
Spindle Relay Configuration is for Mach3 but the wiring is the same for LinuxCNC. Just set in the Stepconf wizard to use a "Spindle ON" and it works just fine.
https://www.rckeith.co.uk/tb6560-4-axis-spindle-relay-configuration-with-mach3/
Tricopter G-code files
https://www.rckeith.co.uk/download/tricopter-frame-linuxcnc/
Видео How to get started with LinuxCNC - CNC router - 2018 канала Keith Howlette
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
CNC Motion Control with LinuxCNC + Mesa FPGA CardCNC Dummies For RoutersLinuxCNC: Software ConfigurationCNC Finale: Automatic Toolchanger Spindle Install & TestingMach3 or UCCNC- CNCnutz Episode 215LinuxCNC for dummies #1How To Make Rotor Blades with a CNC Foam Cutter - Pt1CNC Basics - What You Need To Get StartedRaspberry Pi CNC ControllerMach 4 SUCKS (CNC Software Part 1) - S03E13LinuxCNC User Interface ProposalLinuxCNC pt4 - Stepconf Wizard (Steppers & Parallel Ports)LinuxCNC for the bare bones beginner - Part 1Build Your Own CNC Controller, Part 2 | DDCS V3.1 | 6040 RouterLinuxCNC for the Hobbyist - 010 - LinuxCNC and the Parallel PortHow to Build a CNC Plasma CutterLinuxCNC und Altbacken war gestern. LinuxCNC als Steuerung heute!DIY CNC Router for Under $900 - Free Plans AvailableLinuxCNC HAL #1: The BasicsRaspberry Pi 4 Running PlasmaC (Axis GUI) on LinuxCNC Master (2.9)