How to: Change oil & filter Toyota Vitz / Yaris Mk2 / Daihatsu Charade (service)

Draining and refilling oil and changing oil filter on a Toyota Yaris AKA Vitz AKA Belta 2nd gen (XP90, 2005–2013), AKA Daihatsu Charade (2011–13). Featured is a 2006 Vitz with the 1.3 L engine. Not a hard job to do every 10,000 km.

You will need:
* Oil, full synthetic 5W-30 or other viscosity as spec’ed by Toyota in your locale. Amazon US: http://amzn.to/2m6ouqf | UK: http://amzn.to/2ms6iLb
* New filter, try Amazon US: https://amzn.to/35Fw0kB | UK: https://amzn.to/3cey0T7
* Latex/nitrile gloves, try Amazon US: https://amzn.to/2YJ1CUQ | UK: https://amzn.to/3doCZ3Z
* Jack & axle stands, ramps, or some other safe way of getting under the car. Do not use the vehicle's spare wheel jack.
* 14 mm hex socket with bar and ideally a torque wrench for tightening.
* Oil filter wrench if it won’t come off by hand, try Amazon US: https://amzn.to/2YJPQK0 | UK: https://amzn.to/2xIOnbB
* Brake clean / degreaser and rags.
* Oil pan to drain old oil.
* Container in which to dispose of old oil.
* Funnel.

(Using the above links will help support my channel and is appreciated!)

Видео How to: Change oil & filter Toyota Vitz / Yaris Mk2 / Daihatsu Charade (service) канала Craig's DIY Car