IMI-Gliding POWER-RIGGER in use with Ventus c (remote controlled electric One Man Rigging System)
Detailed video of IMI-Gliding POWER-RIGGER in use with singleseater Ventus c. Assembly of Power-Rigger, rigging and de-rigging of Ventus by it´s designer Jan Kantor, IMI-Gliding. Over 180 Power-Rigger units delivered (September 2018) since the introduction in April 2017, most of them for heavy twoseaters Arcus, ASG32, ASH25 or heavy singleseaters ASH31, Shark, Ventus 2cx, JS1 and many other types. Ventus is not so light to rig as the gliders with 2 main bolts are...
The unique design of the P-R ensures quick and simple assembly/disassembly for simple storing or transport. Chassis made almost completelly from aluminium lead to low weight of only 20,5-24kg according to the type. The body design is based on our huge experience with the mechanical IMI-Gliding "One Man Rigging System", which we have been delivering since 2008, over 1.750 unites were delivered for many types of gliders (almost all types of gliders from GRP and some wooden classical and historical gliders). The Power-Rigger is equipped by strong and quick custom made actuators with 260mm stroke, 12mm/s speed, 1500N nominal strength and IP66 water protection. All details are designed and produced with professional care and with perfect craftmanship. Check the website for more technical details and photos.
http://www.imi-gliding.com/products/power-rigger.html
Видео IMI-Gliding POWER-RIGGER in use with Ventus c (remote controlled electric One Man Rigging System) канала Jan Kantor IMI-Gliding
The unique design of the P-R ensures quick and simple assembly/disassembly for simple storing or transport. Chassis made almost completelly from aluminium lead to low weight of only 20,5-24kg according to the type. The body design is based on our huge experience with the mechanical IMI-Gliding "One Man Rigging System", which we have been delivering since 2008, over 1.750 unites were delivered for many types of gliders (almost all types of gliders from GRP and some wooden classical and historical gliders). The Power-Rigger is equipped by strong and quick custom made actuators with 260mm stroke, 12mm/s speed, 1500N nominal strength and IP66 water protection. All details are designed and produced with professional care and with perfect craftmanship. Check the website for more technical details and photos.
http://www.imi-gliding.com/products/power-rigger.html
Видео IMI-Gliding POWER-RIGGER in use with Ventus c (remote controlled electric One Man Rigging System) канала Jan Kantor IMI-Gliding
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
One man assembling glider plane with SPRC made by Enstroj (less than 15 min)Rigging the Astir CS 77 gliderIMI Gliding Equipment OverviewSolo Arcus assemblyGlider Pilot Flies Unexpected Air Show Performance - Loses License 7 MonthsOne Man Rigging DG400 - Ein Mann Aufrüsten DG400Silent 2 JET start-up & take-off (turbine NIKE)1075km flight with the new VentusArcus 8m - First flight at the seaside in Brittany"Spin, Spin, Spin!"SoaringXX I Ground handling equipment4k Gliding From Benalla (Beautiful Skies)One Man Rigger for Sailplanes, scratch built, LS8-18Home made ultralight trikeTop 10 Coolest Aircraft in the world that will blow your mindVentus 2cx landingASG29 One Man RigTravelling to Berlin by Glider 700 km - Day 2How It´s Made | Factory Tour At HpH SailplanesCircuit in a Ventus B at Bowland Forest Gliding Club