Make a Dremel Angle Attachment
►Subscribe! https://bit.ly/2m1d1y7
►T-shirts & Hoodies! https://bit.ly/2kABytm
Big news! I got my self a nice little lathe for my future projects and I'm really happy so far using it. It's the Optimum TU2004V. I wanted a simple first project to make with it, so I made an angle attachment for my Dremel tool. The reason is because it's really much more comfortable holding it with one hand and not having to twist your arm. Of course, you can buy the off the shelf angle attachment that dremel offers but at a much higher price. This build was made with bits and parts that I had laying around and it didn't cost more than $4.
Support my videos!: https://www.patreon.com/johnnyq90
Subscribe to my channel! https://www.youtube.com/user/johnnyq90
Follow me on Twitter! https://twitter.com/JohnnyQ90
Follow me on Google+ https://plus.google.com/u/0/b/104633881118655653159/104633881118655653159/posts
CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://chriszabriskie.com/divider/
Artist: http://chriszabriskie.com/
Видео Make a Dremel Angle Attachment канала JohnnyQ90
►T-shirts & Hoodies! https://bit.ly/2kABytm
Big news! I got my self a nice little lathe for my future projects and I'm really happy so far using it. It's the Optimum TU2004V. I wanted a simple first project to make with it, so I made an angle attachment for my Dremel tool. The reason is because it's really much more comfortable holding it with one hand and not having to twist your arm. Of course, you can buy the off the shelf angle attachment that dremel offers but at a much higher price. This build was made with bits and parts that I had laying around and it didn't cost more than $4.
Support my videos!: https://www.patreon.com/johnnyq90
Subscribe to my channel! https://www.youtube.com/user/johnnyq90
Follow me on Twitter! https://twitter.com/JohnnyQ90
Follow me on Google+ https://plus.google.com/u/0/b/104633881118655653159/104633881118655653159/posts
CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Source: http://chriszabriskie.com/divider/
Artist: http://chriszabriskie.com/
Видео Make a Dremel Angle Attachment канала JohnnyQ90
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Homemade Knurling JigDIY Drill Press Stand with Free PlansMetal working: Making "Dremelathe" small rotary tool powered lathe Part 2. (Workstation part 3)Tip of the day: Dremel right angle to flex shaftDremel Oymacılıkta nasıl usta olunur?Miniature Gasoline Engine Powered Water PUMP!Making BILLET Aluminium Plates for the TWIN Rotary Wankel EngineEXPERIMENTAL SANDING TOOLHomemade Rotary Tool Plunge BaseDremel Right Angle Attachment 575 Demo & Review in HD how toDIY Metal Lathe Machine Without Using a Lathe MachineDremel 575 Right Angle Attachment: Overview and HackConvert your rotary tool into a DIY mini lathe for modelismСравнение угловой приставки Dremel 575 с китайской.0.6psi @ 90,000rpm Supercharger on MINI 2 Cylinder Four Stroke Engine! - BLOW Through SetupPrecision Machinists Jack for Toolmaking - Just One FixtureBest Right Angle Dremel Tool Attachment - 575 Right Angle Attachment for Rotary Tool REVIEWDremel 335 Plunge Router Attachment - Review and DemonstrationMaking a Miniature 5 Vane Air MotorКрутейшая самоделка! Почему, я раньше не додумался до этого!