It's a farewell to a 3D printed tricopter
https://www.patreon.com/pawelspychalski
STL files https://www.thingiverse.com/thing:3292800
Tricopters! It is the last flight of my 3D printed FPV tricopter. Turned out I was not flying it for more than a year and part can be used somewhere else. And yes, there are valid reasons why tricopters never really got through: servo is the weakest point!
Видео It's a farewell to a 3D printed tricopter канала FPV University
STL files https://www.thingiverse.com/thing:3292800
Tricopters! It is the last flight of my 3D printed FPV tricopter. Turned out I was not flying it for more than a year and part can be used somewhere else. And yes, there are valid reasons why tricopters never really got through: servo is the weakest point!
Видео It's a farewell to a 3D printed tricopter канала FPV University
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
ORQA FPV Goggles crisis but future looks good | FPV UniversityTBS Tracer Setup Guide - INAV TutorialMatek F722-STD not booting without battery and how to fix itOutputs & High Five Test | INAV 5 on a flying wing | 5/11🔴 Holy moly, it's hot! | Live Stream with Paweł - 23/07/2022Demag Compensation Explained - BLHeli_32 ESCIndestructible Flying Wing | Flybot Flux Flies Again18 things you don't know about INAVINAV VTX power on a radio switch - tutorialAutotune for Fixed Wing Airplanes - how to do it in INAV?Defaults & Sensors | INAV 5 on a flying wing | 2/11Blackbox | INAV 5 on a flying wing | 10/118 steps to GPS Position Hold for an FPV droneINAV 7 goes public live stream!It has 8 motors, but will it fly? Pirx Lifter X8 octocopter cinelifter maiden flightDSLR camera on a cinelifter drone | 8 motors DIY droneOSD | INAV on a FPV drone tutorialMatek F405-WSE : when smaller can be betterFlight controller architecture - FPV UniversityMatek F405-WMN, SpeedyBee F7 V3 and Blitz ProHow it works: GPS